ZHCSHT9C August   2021  – June 2024 ADC12DJ4000RF

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Device Comparison
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics: DC Specifications
    6. 6.6  Electrical Characteristics: Power Consumption
    7. 6.7  Electrical Characteristics: AC Specifications (Dual-Channel Mode)
    8. 6.8  Electrical Characteristics: AC Specifications (Single-Channel Mode)
    9. 6.9  Timing Requirements
    10. 6.10 Switching Characteristics
    11. 6.11 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Analog Inputs
        1. 7.3.1.1 Analog Input Protection
        2. 7.3.1.2 Full-Scale Voltage (VFS) Adjustment
        3. 7.3.1.3 Analog Input Offset Adjust
      2. 7.3.2 ADC Core
        1. 7.3.2.1 ADC Theory of Operation
        2. 7.3.2.2 ADC Core Calibration
        3. 7.3.2.3 Analog Reference Voltage
        4. 7.3.2.4 ADC Overrange Detection
        5. 7.3.2.5 Code Error Rate (CER)
      3. 7.3.3 Temperature Monitoring Diode
      4. 7.3.4 Timestamp
      5. 7.3.5 Clocking
        1. 7.3.5.1 Noiseless Aperture Delay Adjustment (tAD Adjust)
        2. 7.3.5.2 Aperture Delay Ramp Control (TAD_RAMP)
        3. 7.3.5.3 SYSREF Capture for Multi-Device Synchronization and Deterministic Latency
          1. 7.3.5.3.1 SYSREF Position Detector and Sampling Position Selection (SYSREF Windowing)
          2. 7.3.5.3.2 Automatic SYSREF Calibration
      6. 7.3.6 Programmable FIR Filter (PFIR)
        1. 7.3.6.1 Dual Channel Equalization
        2. 7.3.6.2 Single Channel Equalization
        3. 7.3.6.3 Time Varying Filter
      7. 7.3.7 Digital Down Converters (DDC)
        1. 7.3.7.1 Rounding and Saturation
        2. 7.3.7.2 Numerically-Controlled Oscillator and Complex Mixer
          1. 7.3.7.2.1 NCO Fast Frequency Hopping (FFH)
          2. 7.3.7.2.2 NCO Selection
          3. 7.3.7.2.3 Basic NCO Frequency Setting Mode
          4. 7.3.7.2.4 Rational NCO Frequency Setting Mode
          5. 7.3.7.2.5 NCO Phase Offset Setting
          6. 7.3.7.2.6 NCO Phase Synchronization
        3. 7.3.7.3 Decimation Filters
        4. 7.3.7.4 Output Data Format
        5. 7.3.7.5 Decimation Settings
          1. 7.3.7.5.1 Decimation Factor
          2. 7.3.7.5.2 DDC Gain Boost
      8. 7.3.8 JESD204C Interface
        1. 7.3.8.1  Transport Layer
        2. 7.3.8.2  Scrambler
        3. 7.3.8.3  Link Layer
        4. 7.3.8.4  8B/10B Link Layer
          1. 7.3.8.4.1 Data Encoding (8B/10B)
          2. 7.3.8.4.2 Multiframes and the Local Multiframe Clock (LMFC)
          3. 7.3.8.4.3 Code Group Synchronization (CGS)
          4. 7.3.8.4.4 Initial Lane Alignment Sequence (ILAS)
          5. 7.3.8.4.5 Frame and Multiframe Monitoring
        5. 7.3.8.5  64B/66B Link Layer
          1. 7.3.8.5.1 64B/66B Encoding
          2. 7.3.8.5.2 Multiblocks, Extended Multiblocks and the Local Extended Multiblock Clock (LEMC)
          3. 7.3.8.5.3 Block, Multiblock and Extended Multiblock Alignment using Sync Header
            1. 7.3.8.5.3.1 Cyclic Redundancy Check (CRC) Mode
            2. 7.3.8.5.3.2 Forward Error Correction (FEC) Mode
          4. 7.3.8.5.4 Initial Lane Alignment
          5. 7.3.8.5.5 Block, Multiblock and Extended Multiblock Alignment Monitoring
        6. 7.3.8.6  Physical Layer
        7. 7.3.8.7  SerDes Pre-Emphasis
        8. 7.3.8.8  JESD204C Enable
        9. 7.3.8.9  Multi-Device Synchronization and Deterministic Latency
        10. 7.3.8.10 Operation in Subclass 0 Systems
      9. 7.3.9 Alarm Monitoring
        1. 7.3.9.1 NCO Upset Detection
        2. 7.3.9.2 Clock Upset Detection
        3. 7.3.9.3 FIFO Upset Detection
    4. 7.4 Device Functional Modes
      1. 7.4.1 Dual-Channel Mode
      2. 7.4.2 Single-Channel Mode (DES Mode)
      3. 7.4.3 Dual-Input Single-Channel Mode (DUAL DES Mode)
      4. 7.4.4 JESD204C Modes
        1. 7.4.4.1 JESD204C Operating Modes Table
        2. 7.4.4.2 JESD204C Modes continued
        3. 7.4.4.3 JESD204C Transport Layer Data Formats
        4. 7.4.4.4 64B/66B Sync Header Stream Configuration
        5. 7.4.4.5 Dual DDC and Redundant Data Mode
      5. 7.4.5 Power-Down Modes
      6. 7.4.6 Test Modes
        1. 7.4.6.1 Serializer Test-Mode Details
        2. 7.4.6.2 PRBS Test Modes
        3. 7.4.6.3 Clock Pattern Mode
        4. 7.4.6.4 Ramp Test Mode
        5. 7.4.6.5 Short and Long Transport Test Mode
          1. 7.4.6.5.1 Short Transport Test Pattern
          2. 7.4.6.5.2 Long Transport Test Pattern
        6. 7.4.6.6 D21.5 Test Mode
        7. 7.4.6.7 K28.5 Test Mode
        8. 7.4.6.8 Repeated ILA Test Mode
        9. 7.4.6.9 Modified RPAT Test Mode
      7. 7.4.7 Calibration Modes and Trimming
        1. 7.4.7.1 Foreground Calibration Mode
        2. 7.4.7.2 Background Calibration Mode
        3. 7.4.7.3 Low-Power Background Calibration (LPBG) Mode
      8. 7.4.8 Offset Calibration
      9. 7.4.9 Trimming
    5. 7.5 Programming
      1. 7.5.1 Using the Serial Interface
        1. 7.5.1.1 SCS
        2. 7.5.1.2 SCLK
        3. 7.5.1.3 SDI
        4. 7.5.1.4 SDO
        5. 7.5.1.5 Streaming Mode
    6. 7.6 SPI Register Map
  9. 8 Application Information Disclaimer
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 Wideband RF Sampling Receiver
        1. 8.2.1.1 Design Requirements
          1. 8.2.1.1.1 Input Signal Path
          2. 8.2.1.1.2 Clocking
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1 Calculating Values of AC-Coupling Capacitors
        3. 8.2.1.3 Application Curves
    3. 8.3 Initialization Set Up
    4. 8.4 Power Supply Recommendations
      1. 8.4.1 Power Sequencing
    5. 8.5 Layout
      1. 8.5.1 Layout Guidelines
      2. 8.5.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 Development Support
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 接收文档更新通知
    4. 9.4 支持资源
    5. 9.5 商标
    6. 9.6 静电放电警告
    7. 9.7 术语表
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information

6.8 Electrical Characteristics: AC Specifications (Single-Channel Mode)

typical values at TA = 25°C, VA19 = 1.9 V, VA11 = 1.1 V, VD11 = 1.1 V, default full-scale voltage, input signal applied to INA±, fIN = 347 MHz, AIN = –1 dBFS, fCLK = 4 GHz, filtered 1-VPP sine-wave clock, JMODE = 1, Dither enabled with default settings, VA11, VD11 and VS11 noise suppression ON (EN_VA11_NOISE_SUPPR = EN_VD11_NOISE_SUPPR = EN_VS11_NOISE_SUPPR = 1), and background calibration (unless otherwise noted); minimum and maximum values are at nominal supply voltages and over the operating free-air temperature range provided in the Recommended Operating Conditions table
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
FPBW Full-power input bandwidth (–3 dB)(1) Foreground calibration 7.75 GHz
Background calibration 7.7
CER Code error rate Maximum CER, does not include JESD204C interface BER 10–18 Errors/ sample
NOISEDC DC input noise standard deviation No input, foreground calibration, excludes DC offset, includes fixed interleaving spurs (fS / 2 and fS / 4 spurs), OS_CAL enabled 2.9 LSB
NSD Noise spectral density, excludes fixed interleaving spurs (fS / 2 and fS / 4 spur) Maximum full-scale voltage (VFS = 1.0 VPP), AIN = –20 dBFS –155.0 dBFS/
Hz
Default full-scale voltage (VFS = 0.8 VPP), AIN = –20 dBFS –153.5
NF Noise figure, ZS = 100 Ω Maximum full-scale voltage (VFS = 1.0 VPP), AIN = –20 dBFS 20.0 dB
Default full-scale voltage (VFS = 0.8 VPP), AIN = –20 dBFS 19.6
SNR Signal-to-noise ratio, excluding DC, HD2 to HD9, fS / 2, fS / 4, fS / 2 – fIN, fS / 4 ± fIN fIN = 347 MHz AIN = –1 dBFS 56.9 dBFS
AIN = –3 dBFS 57.2
AIN = –12 dBFS 57.6
AIN = –3 dBFS, VFS = 1.0 VPP 58.4
fIN = 997 MHz AIN = –1 dBFS 56.7
AIN = –3 dBFS 57.0
AIN = –12 dBFS 57.6
fIN = 2397 MHz AIN = –1 dBFS 52 55.8
AIN = –3 dBFS 56.4
AIN = –12 dBFS 57.4
AIN = –3 dBFS, VFS = 1.0 VPP 57.4
fIN = 4197 MHz AIN = –1 dBFS 54.1
AIN = –3 dBFS 55.2
AIN = –12 dBFS 57.3
fIN = 5497 MHz AIN = –1 dBFS 52.8
AIN = –3 dBFS 54.2
AIN = –12 dBFS 57.1
fIN = 7597 MHz AIN = –1 dBFS 51.0
AIN = –3 dBFS 52.5
AIN = –12 dBFS 56.6
SINAD Signal-to-noise and distortion ratio, excluding DC and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 55.8 dBFS
AIN = –3 dBFS 56.4
AIN = –12 dBFS 57.1
AIN = –3 dBFS, VFS = 1.0 VPP 57.4
fIN = 997 MHz AIN = –1 dBFS 55.5
AIN = –3 dBFS 56.1
AIN = –12 dBFS 57.1
fIN = 2397 MHz AIN = –1 dBFS 53.6
AIN = –3 dBFS 54.9
AIN = –12 dBFS 56.9
AIN = –3 dBFS, VFS = 1.0 VPP 55.5
fIN = 4197 MHz AIN = –1 dBFS 51.0
AIN = –3 dBFS 52.9
AIN = –12 dBFS 56.5
fIN = 5497 MHz AIN = –1 dBFS 50.4
AIN = –3 dBFS 52.6
AIN = –12 dBFS 56.4
fIN = 7597 MHz AIN = –1 dBFS 48.8
AIN = –3 dBFS 50.8
AIN = –12 dBFS 55.9
ENOB Effective number of bits, excluding DC and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 9.0 bits
AIN = –3 dBFS 9.1
AIN = –12 dBFS 9.2
AIN = –3 dBFS, VFS = 1.0 VPP 9.2
fIN = 997 MHz AIN = –1 dBFS 8.9
AIN = –3 dBFS 9.0
AIN = –12 dBFS 9.2
fIN = 2397 MHz AIN = –1 dBFS 8.6
AIN = –3 dBFS 8.2
AIN = –12 dBFS 9.2
AIN = –3 dBFS, VFS = 1.0 VPP 8.9
fIN = 4197 MHz AIN = –1 dBFS 8.2
AIN = –3 dBFS 8.5
AIN = –12 dBFS 9.1
fIN = 5497 MHz AIN = –1 dBFS 8.1
AIN = –3 dBFS 8.4
AIN = –12 dBFS 9.1
fIN = 7597 MHz AIN = –1 dBFS 7.5
AIN = –3 dBFS 8.2
AIN = –12 dBFS 9.0
SFDR Spurious free dynamic range, excluding DC, fS / 4 and fS / 2 fixed spurs fIN = 347 MHz AIN = –1 dBFS 66.4 dBFS
AIN = –3 dBFS 69.3
AIN = –12 dBFS 70
AIN = –3 dBFS, VFS = 1.0 VPP 68
fIN = 997 MHz AIN = –1 dBFS 67
AIN = –3 dBFS 68
AIN = –12 dBFS 71
fIN = 2397 MHz AIN = –1 dBFS 62
AIN = –3 dBFS 65
AIN = –12 dBFS 75
AIN = –3 dBFS, VFS = 1.0 VPP 64
fIN = 4197 MHz AIN = –1 dBFS 56
AIN = –3 dBFS 60
AIN = –12 dBFS 68
fIN = 5497 MHz AIN = –1 dBFS 57
AIN = –3 dBFS 61
AIN = –12 dBFS 67
fIN = 7597 MHz AIN = –1 dBFS 56
AIN = –3 dBFS 60
AIN = –12 dBFS 68
HD2 2nd-order harmonic distortion fIN = 347 MHz AIN = –1 dBFS –77 dBFS
AIN = –3 dBFS –83
AIN = –12 dBFS –83
AIN = –3 dBFS, VFS = 1.0 VPP –80
fIN = 997 MHz AIN = –1 dBFS –74
AIN = –3 dBFS –78
AIN = –12 dBFS –85
fIN = 2397 MHz AIN = –1 dBFS –69 -60
AIN = –3 dBFS –74
AIN = –12 dBFS –87
AIN = –3 dBFS, VFS = 1.0 VPP –73
fIN = 4197 MHz AIN = –1 dBFS –68
AIN = –3 dBFS –72
AIN = –12 dBFS –85
fIN = 5497 MHz AIN = –1 dBFS –68
AIN = –3 dBFS –70
AIN = –12 dBFS –86
fIN = 7597 MHz AIN = –1 dBFS –63
AIN = –3 dBFS –66
AIN = –12 dBFS –79
HD3 3rd-order harmonic distortion fIN = 347 MHz AIN = –1 dBFS –67 dBFS
AIN = –3 dBFS –72
AIN = –12 dBFS –87
AIN = –3 dBFS, VFS = 1.0 VPP –69
fIN = 997 MHz AIN = –1 dBFS –72
AIN = –3 dBFS –81
AIN = –12 dBFS –81
fIN = 2397 MHz AIN = –1 dBFS –62 -58
AIN = –3 dBFS –69
AIN = –12 dBFS –80
AIN = –3 dBFS, VFS = 1.0 VPP –65
fIN = 4197 MHz AIN = –1 dBFS –58
AIN = –3 dBFS –63
AIN = –12 dBFS –83
fIN = 5497 MHz AIN = –1 dBFS –59
AIN = –3 dBFS –66
AIN = –12 dBFS –78
fIN = 7597 MHz AIN = –1 dBFS –57
AIN = –3 dBFS –64
AIN = –12 dBFS –80
fS / 2 – fIN fS / 2 – fIN input signal dependent interleaving spur fIN = 347 MHz AIN = –1 dBFS –72 dBFS
AIN = –3 dBFS –77
AIN = –12 dBFS –80
AIN = –3 dBFS, VFS = 1.0 VPP –75
fIN = 997 MHz AIN = –1 dBFS –68
AIN = –3 dBFS –72
AIN = –12 dBFS –77
fIN = 2397 MHz AIN = –1 dBFS –63
AIN = –3 dBFS –64
AIN = –12 dBFS –72
AIN = –3 dBFS, VFS = 1.0 VPP –65
fIN = 4197 MHz AIN = –1 dBFS –60
AIN = –3 dBFS –61
AIN = –12 dBFS –70
fIN = 5497 MHz AIN = –1 dBFS –60
AIN = –3 dBFS –62
AIN = –12 dBFS –70
fIN = 7597 MHz AIN = –1 dBFS –59
AIN = –3 dBFS –60
AIN = –12 dBFS –71
fS / 4 ± fIN fS / 4 ± fIN input signal dependent interleaving spur fIN = 347 MHz AIN = –1 dBFS –76 dBFS
AIN = –3 dBFS –77
AIN = –12 dBFS –83
AIN = –3 dBFS, VFS = 1.0 VPP –77
fIN = 997 MHz AIN = –1 dBFS –75
AIN = –3 dBFS –78
AIN = –12 dBFS –79
fIN = 2397 MHz AIN = –1 dBFS –73 -55
AIN = –3 dBFS –76
AIN = –12 dBFS –79
AIN = –3 dBFS, VFS = 1.0 VPP –78
fIN = 4197 MHz AIN = –1 dBFS –73
AIN = –3 dBFS –72
AIN = –12 dBFS –81
fIN = 5497 MHz AIN = –1 dBFS –69
AIN = –3 dBFS –72
AIN = –12 dBFS –79
fIN = 7597 MHz AIN = –1 dBFS –70
AIN = –3 dBFS –71
AIN = –12 dBFS –78
fS / 2 fS / 2 fixed interleaving spur, independent of input signal AIN = –20 dBFS, OS_CAL disabled –70 dBFS
AIN = –20 dBFS, OS_CAL enabled –76
fS / 4 fS / 4 fixed interleaving spur, independent of input signal AIN = –20 dBFS –72 -55 dBFS
SPUR Worst spur, excluding DC, HD2, HD3, fS / 2, fS / 4, fS / 2 - fIN, and fS / 4 ± fIN fIN = 347 MHz AIN = –1 dBFS –75 dBFS
AIN = –3 dBFS –76
AIN = –12 dBFS –82
AIN = –3 dBFS, VFS = 1.0 VPP –77
fIN = 997 MHz AIN = –1 dBFS –71
AIN = –3 dBFS –73
AIN = –12 dBFS –78
fIN = 2397 MHz AIN = –1 dBFS –74 -62
AIN = –3 dBFS –76
AIN = –12 dBFS –80
AIN = –3 dBFS, VFS = 1.0 VPP –76
fIN = 4197 MHz AIN = –1 dBFS –72
AIN = –3 dBFS –75
AIN = –12 dBFS –81
fIN = 5497 MHz AIN = –1 dBFS –71
AIN = –3 dBFS –74
AIN = –12 dBFS –81
fIN = 7597 MHz AIN = –1 dBFS –66
AIN = –3 dBFS –70
AIN = –12 dBFS –80
IMD3 3rd-order intermodulation distortion f1 = 343 MHz,
f2 = 353 MHz		 AIN = –7 dBFS per tone –77 dBFS
AIN = –9 dBFS per tone –83
AIN = –18 dBFS per tone –84
AIN = –9 dBFS per tone, VFS = 1.0 VPP –84
f1 = 993 MHz,
f2 = 1003 MHz		 AIN = –7 dBFS per tone –83
AIN = –9 dBFS per tone –89
AIN = –18 dBFS per tone –83
f1 = 2393 MHz,
f2 = 2403 MHz		 AIN = –7 dBFS per tone –82
AIN = –9 dBFS per tone –88
AIN = –18 dBFS per tone –83
AIN = –9 dBFS per tone, VFS = 1.0 VPP –87
f1 = 4193 MHz,
f2 = 4203 MHz		 AIN = –7 dBFS per tone –66
AIN = –9 dBFS per tone –73
AIN = –18 dBFS per tone –93
f1 = 5493 MHz,
f2 = 5503 MHz		 AIN = –7 dBFS per tone –98
AIN = –9 dBFS per tone –100
AIN = –18 dBFS per tone –100
f1 = 7593 MHz,
f2 = 7603 MHz		 AIN = –7 dBFS per tone –51
AIN = –9 dBFS per tone –58
AIN = –18 dBFS per tone –84
(1) Full-power input bandwidth (FPBW) is defined as the input frequency where the reconstructed output of the ADC has dropped 3 dB below the power of a full-scale input signal at a low input frequency. Useable bandwidth may exceed the –3-dB, full-power input bandwidth.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |