米6体育平台手机版

ZHCSIE0A June 2018 – October 2018 ISO224

PRODUCTION DATA.

7.1 Absolute Maximum Ratings

see ⁽¹⁾

		MIN	MAX	UNIT
Power-supply voltage	VDD1 to GND1	–0.3	26	V
Power-supply voltage	VDD2 to GND2	–0.3	6.5	V
Input voltage	IN to GND1⁽²⁾	–15	15	V
Input current	Continuous, at IN pin⁽³⁾	–10	10	mA
Output voltage	OUTP, OUTN	GND2 – 0.3	VDD2 + 0.3	V
Temperature	Junction, T_J		150	°C
Temperature	Storage, T_stg	–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) Exposure to absolute-maximum-rated condition for extended periods may increase input leakage current.

(3) Limit the input current at IN pin to prevent permanent damage to the device. The IN pin is internally protected by a voltage clamp. See Figure 42 for a typical current versus voltage characteristic curve of the input clamp.