米6体育平台手机版

ZHCSIL1A July 2018 – December 2018 DSLVDS1001

PRODUCTION DATA.

6.5 Electrical Characteristics

Over Recommended Supply Voltage and Operating Temperature ranges, unless otherwise specified.⁽¹⁾⁽²⁾

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
\|V_OD\|	Output Differential Voltage	R_L = 100 Ω (Figure 7) OUT+, OUT– Pins		250	350	450	mV
ΔV_OD	V_OD Magnitude Change	R_L = 100 Ω (Figure 8) OUT+, OUT– Pins			3	35	mV
V_OS	Offset Voltage	R_L = 100 Ω (Figure 7) OUT+, OUT– Pins		1.125	1.25	1.375	V
ΔV_OS	Offset Magnitude Change	R_L = 100 Ω (Figure 7) OUT+, OUT– Pins				25	mV
I_OFF	Power-off Leakage	V_OUT = 3.6 V or GND, V_DD = 0 V OUT+, OUT– Pins			±2	±15	μA
I_OS	Output Short Circuit Current⁽³⁾	V_OUT+ and V_OUT− = 0 V OUT+, OUT– Pins			−5	−20	mA
I_OSD	Differential Output Short Circuit Current⁽³⁾	V_OD = 0 V OUT+, OUT– Pins			−5	−12	mA
V_IH	Input High Voltage	TTL IN Pin		2		V_DD	V
V_IL	Input Low Voltage	TTL IN Pin		GND		0.8	V
I_IH	Input High Current	V_IN = 3.3 V or 2.4 V TTL IN Pin			±2	±15	μA
I_IL	Input Low Current	V_IN = GND or 0.5 V TTL IN Pin			±2	±15	μA
C_IN	Input Capacitance	TTL IN Pin			3		pF
I_DD	Power Supply Current	No Load	V_IN = V_DD or GND		5	8	mA
I_DD	Power Supply Current	R_L = 100 Ω	V_IN = V_DD or GND		7	10	mA

(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground except V_OD.

(2) All typicals are given for: V_DD = +3.3 V and T_A = +25°C.

(3) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only.