Table 3. INPUT/OUTPUT Logic Table(1)
| INPUT |
DISABLE(2) |
OUTPUTS |
NOTE |
| PWM |
OUTA |
OUTB |
| L or Left Open |
L or Left Open |
L |
H |
Output transitions occur after the dead time expires. See Programmable Dead Time (DT) Pin |
| H |
L or Left Open |
H |
L |
| X |
H |
L |
L |
- |
(1) "X" means L, H or left open.
(2) DIS pin disables both driver outputs if asserted high, enables if set low or left open. This pin is pulled low internally if left open. It is recommended to tie this pin to ground if not used to achieve better noise immunity. Bypass using a ≈1nF low ESR/ESL capacitor close to DIS pin when connecting to a µC with distance.