6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)(2)
|
MIN |
MAX |
UNIT |
| VIN to GND(3) |
–0.3 |
100 |
V |
| SENSE, OUT, and PGD to GND |
–0.3 |
100 |
V |
| GATE to GND(3) |
–0.3 |
100 |
V |
| OUT to GND (1 -ms transient) (4) |
–1 |
100 |
V |
| UVLO to GND |
–0.3 |
100 |
V |
| OVLO to GND |
–0.3 |
7 |
V |
| VIN to SENSE |
–0.3 |
0.3 |
V |
| Maximum junction temperature, TJMAX |
|
150 |
°C |
| Storage temperature, Tstg |
–65 |
150 |
°C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and specifications.
(3) The GATE pin voltage is typically 12 V above VIN when the LM5069 is enabled. Therefore, the Absolute Maximum Ratings for VIN
(100 V) applies only when the LM5069 is disabled, or for a momentary surge to that voltage because the Absolute Maximum Rating for the GATE pin is also 100 V.
(4) Select external MOSFET with VGS(th) voltage higher than VOUT during -ve transient. This avoids MOSFET getting turned-ON during -ve transient.