米6体育平台手机版

ZHCSLY9A October 2020 – December 2020 LM7310

PRODUCTION DATA

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

Parameter		Pin	MIN	MAX	UNIT
V_IN	Maximum Input Voltage Range, –40 ℃ ≤ T_J ≤ 125 ℃	IN	max (–15, V_OUT - 21)	28	V
V_IN	Maximum Input Voltage Range, –10 ℃ ≤ T_J ≤ 125 ℃	IN	max (–15, V_OUT - 22)	28	V
V_OUT	Maximum Output Voltage Range, –40 ℃ ≤ T_J ≤ 125 ℃	OUT	–0.3	min (28, V_IN + 21)
V_OUT	Maximum Output Voltage Range, –10 ℃ ≤ T_J ≤ 125 ℃	OUT	–0.3	min (28, V_IN + 22)
V_OUT,PLS	Minimum Output Voltage Pulse (< 1 µs)	OUT	–0.8
V_EN/UVLO	Maximum Enable Pin Voltage Range ⁽²⁾	EN/UVLO	–0.3	6.5	V
V_OVLO	Maximum OVLO Pin Voltage Range ⁽²⁾	OVLO	–0.3	6.5	V
V_dVdT	Maximum dVdT Pin Voltage Range	dVdt	Internally Limited		V
V_PGTH	Maximum PGTH Pin Voltage Range ⁽²⁾	PGTH	–0.3	6.5	V
V_PG	Maximum PG Pin Voltage Range	PG	–0.3	6.5	V
V_IMON	Maximum IMON Pin Voltage Range	IMON		1.8	V
I_MAX	Maximum Continuous Switch Current	IN to OUT	5.5		A
T_J	Junction temperature		Internally Limited		°C
T_LEAD	Maximum Lead Temperature			300	°C
T_STG	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) If this pin has a pull-up up to V_IN, it is recommended to use a resistance of 350 kΩ or higher to limit the current under conditions where IN can be exposed to reverse polarity.