米6体育平台手机版

ZHCSLY9A October 2020 – December 2020 LM7310

PRODUCTION DATA

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

Parameter		Pin	MIN	MAX	UNIT
V_IN	Input Voltage Range	IN	2.7	23	V
V_OUT	Output Voltage Range	OUT		min (23, V_IN + 20)	V
V_EN/UVLO	Enable Pin Voltage Range	EN/UVLO		5 ⁽²⁾	V
V_OVLO	OVLO Pin Voltage Range	OVLO	0.5	1.5	V
V_dVdT	dVdT Capacitor Voltage Rating	dVdt	V_IN + 5 V ⁽¹⁾		V
V_PGTH	PGTH Pin Voltage Range	PGTH		5 ⁽³⁾	V
V_PG	PG Pin Voltage Range	PG		5 ⁽³⁾	V
V_IMON	IMON Pin Voltage	IMON		1.5	V
I_MAX	Continuous Switch Current, , T_J ≤ 125 ℃	IN to OUT		5.5	A
T_J	Junction temperature		–40	125	°C

(1) In a PowerMUX/ORing scenario with unequal supplies, the dVdt capacitor rating for each device should be chosen based on the highest of the 2 rails.

(2) For supply voltages below 5V, it is okay to pull up the EN pin to IN directly. For supply voltages greater than 5V or systems which can be exposed to reverse polarity on input supply, it is recommended to use a pull-up resistor with a minimum value of 350 kΩ.

(3) For systems which can be exposed to reverse polarity on input supply, if this pin is referred to input supply, it is recommended to use a pull-up resistor with a minimum value of 350 kΩ to limit the current through the pin.