ZHCSMA7D January 2022 – April 2024 TPS4811-Q1
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Device Comparison Table
- 5 Pin Configuration and Functions
- 6 Specifications
- 7 Parameter Measurement Information
-
8 Detailed Description
- 8.1 Overview
- 8.2 Functional Block Diagram
- 8.3
Feature Description
- 8.3.1 Charge Pump and Gate Driver output (VS, PU, PD, BST, SRC)
- 8.3.2 Capacitive Load Driving
- 8.3.3 Short-Circuit Protection
- 8.3.4 Short-Circuit Protection
- 8.3.5 Analog Current Monitor Output (IMON)
- 8.3.6 Overvoltage (OV) and Undervoltage Protection (UVLO)
- 8.3.7 Device Functional Mode (Shutdown Mode)
- 8.3.8 Remote Temperature sensing and Protection (DIODE)
- 8.3.9 Output Reverse Polarity Protection
- 8.3.10 TPS4811x-Q1 as a Simple Gate Driver
- 9 Application and Implementation
- 10Device and Documentation Support
- 11Revision History
- 12Mechanical, Packaging, and Orderable Information
9.2.3 Application Curves
Figure 9-2 Start-Up Profile of
Bootstrap Voltage for INP = GND and CBST = 470 nF
Figure 9-4 Turn-ON Response of
TPS48110-Q1 for INP -> LOW to HIGH and CBST = 470 nF
Figure 9-6 Overvoltage Cut-off
Response at 58-V Level of TPS48110-Q1
Figure 9-8 IMON Response During 10-A Load Step
Figure 9-10 Auto-Retry Response of
TPS48110-Q1 for an Overcurrent Fault
Figure 9-12 Response During Coming Out
of Overload Fault With INP Reset
Figure 9-3 Start-Up Profile of
Bootstrap Voltage for INP = HIGH and CBST = 470 nF
Figure 9-5 Turn-OFF Response of
TPS48110-Q1 for INP -> HIGH to LOW and CBST = 470 nF
Figure 9-7 Load Switching at 100 Hz
With TPS48110-Q1
Figure 9-9 Overcurrent Response of
TPS48110-Q1 for a Load Step from 5 A to 18 A With 15-A Overcurrent
Protection Setting
Figure 9-11 Latch-off Response of
TPS48110-Q1 for an Overcurrent Fault
Figure 9-13 Output Hot-Short Response
of the TPS48110-Q1 Device