ZHCSMC2V September   2003  – September 2024 TPS736

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Thermal Information
    6. 5.6 Electrical Characteristics
    7. 5.7 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagrams
    3. 6.3 Feature Description
      1. 6.3.1 Output Noise
      2. 6.3.2 Internal Current Limit
      3. 6.3.3 Enable Pin and Shutdown
      4. 6.3.4 Reverse Current
    4. 6.4 Device Functional Modes
      1. 6.4.1 Normal Operation with 1.7 V ≤ VIN ≤ 5.5 V and VEN ≥ 1.7 V
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Design Requirements
      2. 7.2.2 Detailed Design Procedure
        1. 7.2.2.1 Input and Output Capacitor Requirements
        2. 7.2.2.2 Dropout Voltage
        3. 7.2.2.3 Transient Response
      3. 7.2.3 Application Curves
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Power Dissipation
        2. 7.4.1.2 Thermal Protection
        3. 7.4.1.3 Package Mounting
      2. 7.4.2 Layout Examples
  9. 8 Device and Documentation Support
    1. 8.1 Device Support
      1. 8.1.1 Development Support
        1. 8.1.1.1 Evaluation Modules
        2. 8.1.1.2 Spice Models
      2. 8.1.2 Device Nomenclature
    2. 8.2 Documentation Support
      1. 8.2.1 Related Documentation
    3. 8.3 接收文档更新通知
    4. 8.4 支持资源
    5. 8.5 Trademarks
    6. 8.6 静电放电警告
    7. 8.7 术语表
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

5.6 Electrical Characteristics

Over operating temperature range (TJ = –40°C to 125°C), VIN = VOUT(nom) +  0.5V(1), IOUT = 10mA, VEN = 1.7V , and COUT = 0.1μF , unless otherwise noted. Typical values are at TJ = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VIN Input voltage range(1)(2) 1.7 5.5 V
VFB Internal reference (TPS73601) TJ = 25°C  1.198 1.204 1.210 V
VOUT Output voltage range (TPS73601)(3) VFB 5.5 - VDO V
Accuracy(1)(4) Nominal  TJ = 25°C –0.5 0.5 %
over VIN, IOUT, and T   VOUT + 0.5V ≤ VIN ≤ 5.5V; 10mA ≤ IOUT ≤ 400mA  –1 ±0.5 1
ΔVOUT(ΔVIN) Line regulation (1) VOUT(NOM) + 0.5V ≤ VIN ≤ 5.5V 0.01 %/V
ΔVOUT(ΔIOUT) Load regulation 1mA ≤ IOUT ≤ 400mA 0.002 %/mA
10mA ≤ IOUT ≤ 400mA 0.0005
VDO Dropout voltage(5) (VIN = VOUT(NOM) - 0.1V) IOUT = 400mA 75 200 mV
ZO(do) Output impedance in dropout 1.7V ≤ VIN ≤ VOUT + VDO 0.25 Ω
ICL Output current limit VOUT = 0.9 × VOUT(nom)  legacy silicon 400 650 800 mA
3.6V ≤ VIN ≤ 4.2V, 0℃ ≤ TJ ≤ 70℃ 500 800
VOUT = 0.9 × VOUT(nom)  new silicon, M3 suffix 500 800
ISC Short-circuit current VOUT = 0V  450 mA
IREV Reverse leakage current(6) (-IIN) VEN ≤ 0.5V, 0V ≤ VIN ≤ VOUT  0.1 10 µA
IGND Ground pin current IOUT = 10mA (IQ)  400 550 µA
IGND Ground pin current IOUT = 400mA   800 1000 µA
ISHDN Shutdown current (IGND) VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, –40°C ≤ TJ ≤ 100℃, legacy silicon      0.02 1 µA
VEN ≤ 0.5V, VOUT ≤ VIN ≤ 5.5V, new silicon, M3 suffix 0.02 1
IFB Feedback pin current (TPS73601) 0.1 0.3 µA
PSRR Power-supply rejection ratio (ripple rejection) f = 100Hz, IOUT = 400mA 58 dB
f = 10kHz, IOUT = 400mA 37
VN Output noise voltage, BW = 10Hz to 100kHz COUT = 10µF, no CNR 27 x VOUT µVRMS
COUT = 10µF, CNR =0.01µF 8.5 x VOUT
tSTR Startup time VOUT = 3V, RL = 30Ω, COUT = 1μF, CNR = 0.01μF 600 µs
VEN(high) EN pin high (enabled) 1.7 VIN V
VEN(low) EN pin low (shutdown) 0 0.5 V
IEN(high) Enable pin current (enabled) VEN = 5.5V   0.02 0.1 µA
TSD Thermal shutdown temperature Shutdown, temperature increasing 160 °C
Reset, temperature decreasing 140
TJ Operating junction temperature –40 125 ℃
(1) Minimum VIN = VOUT + VDO or 1.7V, whichever is greater.
(2) For VOUT(nom) < 1.6V, when VIN ≤ 1.6V, the output locks to VIN and may result in a damaging over-voltage condition on the output. To avoid this situation, disable the device before powering down VIN. (Legacy silicon only)
(3) TPS73601 is tested at VOUT = 2.5V.
(4) Tolerance of external resistors not included in this specification.
(5) VDO is not measured for output versions with VOUT(nom) < 1.8V, because minimum VIN = 1.7V.
(6) Fixed-voltage versions only; refer to Application Information section for more information.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |