米6体育平台手机版

ZHCSMC4A june 2020 – october 2020 UCC23514

PRODUCTION DATA

6.9 Electrical Characteristics

Unless otherwise noted, all typical values are at T_A = 25°C, V_CC–V_EE= 15V, V_EE= GND. All min and max specifications are at recommended operating conditions (T_J = -40C to 150°C, I_F(on)= 7 mA to 16 mA, V_EE= GND, V_CC= 15 V to 30 V, V_F(off)= –5V to 0.8V)

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
INPUT
I_FLH	Input Forward Threshold Current Low to High	V_OUT > 5 V, Cg = 1 nF	1.5	2.8	4	mA
V_F	Input Forward Voltage	I_F =10 mA	1.8	2.1	2.4	V
V_{F_HL}	Threshold Input Voltage High to Low	V < 5 V, Cg = 1 nF	0.9			V
ΔV_F/ΔT	Temp Coefficient of Input Forward Voltage	I_F =10 mA		1	1.35	mV/°C
V_R	Input Reverse Breakdown Voltage	I_R= 10 uA	15			V
C_IN	Input Capacitance	F = 0.5 MHz		15		pF
OUTPUT
I_OH	High Level Peak Output Current	I_F = 10 mA, V_CC =15V, C_LOAD=0.18uF, C_VDD=10uF, pulse width <10us	3	4.5		A
I_OL	Low Level Peak Output Current	V_F= 0 V, V_CC =15V, C_LOAD=0.18uF, C_VDD=10uF, pulse width <10us	3.5	5.3		A
V_OH	High Level Output Voltage	I_F = 10 mA, I_O= -20mA (with respect to VCC)	0.07	0.18	0.36	V
V_OH	High Level Output Voltage	I_F = 10 mA, I_O= 0 mA		VCC		V
V_OL	Low Level Output Voltage	V_F = 0 V, I_O= 20 mA			25	mV
I_{CC_H}	Output Supply Current (Diode On)	I_F = 10 mA, I_O= 0 mA			2.2	mA
I_{CC_L}	Output Supply Current (Diode Off)	V_F = 0 V, I_O= 0 mA			2	mA
INTERNAL MILLER CLAMP
V_CLMPTH	Miller Clamp Threshold Voltage	CLAMP-V_EE		2.1	2.3	V
I_CLMP	Miller Clamp current	CLAMP = 3.5V above VEE		1.6		A
UNDER VOLTAGE LOCKOUT
UVLO_R	Under Voltage Lockout VCC, rising	UCC23514M, UCC23514S, and UCC23514V: V_CC to V_EE, I_F=10 mA	11	12.5	13.5	V
UVLO_R	Under Voltage Lockout VCC, rising	UCC23514E: V_CC to COM, I_F=10 mA	11	12.5	13.5	V
UVLO_F	Under Voltage Lockout VCC, falling	UCC23514M, UCC23514S, and UCC23514V: V_CC to V_EE, I_F=10 mA	10	11.5	12.5	V
UVLO_F	Under Voltage Lockout VCC, falling	UCC23514E: V_CC to COM, I_F=10 mA	10	11.5	12.5	V
UVLO_HYS	UVLO Hysteresis			1.0		V