4 Revision History
Changes from Revision B (March 2021) to Revision C (August 2022)
- 在整个数据表中删除了对 /PG 引脚和 IBAT 引脚的引用Go
- Updated Section 6 device comparison tableGo
- Corrected common drain to common source in ACDRVx pin function in
Section 7
Go
- Added how to set max input current limit with ILIM_HIZ pin in Section 7
Go
- Added SDRV connected to BAT when shipFET disabled as an option in
Section 7
Go
- Clarified /QON pull up voltage in Section 7
Go
- Updated : System voltage regulation accuracy (when VBAT<VSYSMIN)Go
- Updated: OTG mode voltage regulation accuracyGo
- Added input sensing resistor to Section 9.2
Go
- Added explanation of no battery operation in Section 9.3.6
Go
- Clarified PFM peak inductor current in Section 9.3.6.3
Go
- Clarified SYSMIN charge current clamp and settings in Section 9.3.9.2
Go
- Clarified trickle to precharge regulation in Section 9.3.9.2
Go
- Added SDRV typical output voltage and current to Section 9.3.12
Go
- Updated I2C terminology in text and figures in Section 9.3.14
Go
- Clarified REG0x14 and REG0x33 regarding reporting IBAT discharge
current in Section 9.5.1
Go
- Changed REG0x2E to no longer recommend 12-bit ADC setting in Section 9.5.1
Go
- Corrected part number and device revision in REG0x48 in Section 9.5.1
Go
- Corrected voltage ADC readings as not being 2's complement in Section 9.5.1
Go
- Added optional input snubber/TVS to apps diagram in Section 10.2
Go
Changes from Revision A (November 2020) to Revision B (March 2021)
- Consolidated voltage and current protections into list format in
Section 9.3.13.1
Go
Changes from Revision * (June 2020) to Revision A (November 2020)