Conditions are –40 < T_J  < 125 °C unless otherwise noted.V_VDD = 3.3 V, V_VPWR = 54 V, V_DGND = V_AGND, DGND, KSENSA, KSENSB, KSENSC and KSENSD connected to AGND, and all outputs are unloaded, 2xFBn = 0.  Positive currents are into pins.  R_S = 0.200 Ω, to KSENSA (SEN1 or SEN2), to KSENSB (SEN3 or SEN4), to KSENSC (SEN5 or SEN6) or to KSENSD (SEN7 or SEN8). Typical values are at 25 °C. All voltages are with respect to AGND unless otherwise noted. Operating registers loaded with default values unless otherwise noted.

Figure 7-1 VPWR Current Consumption vs Temperature

Figure 7-3 VPUV Thresholds vs Temperature

Figure 7-5 VDUV Thresholds vs Temperature

Figure 7-7 Discovery Currents vs Temperature

Figure 7-9 Discovery Open Circuit Voltage vs Temperature

Figure 7-11 Mark Voltage vs I_MARK and Temperature

Figure 7-13 Power Good Threshold vs Temperature

Figure 7-15 Port Voltage ADC Measurement vs Temperature

Figure 7-17 Port Current ADC Measurement (100mA) vs Temperature

Figure 7-19 Port Current ADC Measurement (1 A) vs Temperature

Figure 7-21 Inrush Current Limit vs Temperature

Figure 7-23 2x Mode (2xFBn = 1) Current Limit vs Temperature

Figure 7-25 R_OFF (VPWR to DRAIN) vs Temperature

Figure 7-27 1x Mode (2xFBn = 0) Current Foldback vs Drain Voltage

Figure 7-2 VPWR UVLO Thresholds vs Temperature

Figure 7-4 VDD Current Consumption vs Temperature

Figure 7-6 SENSE Pin Bias Current vs Temperature

Figure 7-8 Discovery Resistance Measurement vs Temperature

Figure 7-10 Classification Voltage vs I_CLASS and Temperature

Figure 7-12 Classification and Mark Current Limit vs Temperature

Figure 7-14 Gate Voltage (Port On) vs Temperature

Figure 7-16 VPWR Voltage ADC Measurement vs Temperature

Figure 7-18 Port Current ADC Measurement (770mA) vs Temperature

Figure 7-20 PCut Threshold (30W) vs Temperature

Figure 7-22 1x Mode (2xFBn = 0) Current Limit vs Temperature

Figure 7-24 I_SHORT Threshold vs Temperature

Figure 7-26 Inrush Current Foldback vs Port Voltage

Figure 7-28 2x Mode (2xFBn = 1) Current Foldback vs Drain Voltage