The devices feature an open drain Power good (PGOOD) indicator output. PGOOD can be used for enable and disable control of the downstream loads like DC/DC converters. PGOOD goes high when the internal FET’s gate is enhanced. It goes low when the internal FET turns OFF during a fault event or when SHDN is pulled low or when EN is pulled high. There is a deglitch of 11.5 msec (typical), t_PGOODR, at the rising edge and 10 msec (typical), t_PGOODF, on falling edge. PGOOD is a rated for 58 V and can be pulled to IN or OUT through a resistor.