米6体育平台手机版

ZHCSNL9A May 2021 – December 2021 ISOW1044

PRODUCTION DATA

8.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾⁽²⁾

		MIN	MAX	UNIT
V_DD	Power converter supply voltage	–0.5	6	V
V_ISOIN	Isolated supply voltage, input supply for CAN transceiver	–0.5	6	V
V_ISOOUT	Isolated supply voltage, Power converter output	–0.5	6	V
V_IO	Logic supply voltage	–0.5	6	V
V_BUS	Voltage on bus pins (CANH, CANL with respect to GND2)	-58	58	V
V_{BUS_DIFF}	Max Differential voltage on bus pins (CANH-CANL)	-45	45	V
V_{logic_IO}	Logic I/O voltage level ( RXD, TXD, STB, EN, IN)	–0.5	V_IO + 0.5⁽³⁾	V
V_{logic_IO}	OUT	-0.5	V_ISOIN + 0.5	V
I_O	Output current on RXD, OUT pins	–15	15	mA
T_J	Junction temperature	–40	150	°C
T_stg	Storage temperature	–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the deviceat these or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values except differential I/O bus voltages are with respect to the local ground pin (GND1 or GND2). All voltage values except differential I/O bus voltages are peak voltage values.

(3) The maximum voltage must not be greater than 6 V.