米6体育平台手机版

ZHCSPA5F August 1999 – July 2024 THS4021 , THS4022

PRODUCTION DATA

5.7 Electrical Characteristics - THS4021DGN

at T_A = 25°C, V_CC = ±15 V, R_L = 150 Ω (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
DYNAMIC PERFORMANCE
BW	Small-signal bandwidth (–3 dB)	Gain = 10	V_CC = ±15 V		350		MHz
		Gain = 10	V_CC = ±5 V		280
		Gain = 20	V_CC = ±15 V		80
		Gain = 20	V_CC = ±5 V		70
	Bandwidth for 0.1-dB flatness	Gain = 10	V_CC = ±15 V		17
	Bandwidth for 0.1-dB flatness	Gain = 10	V_CC = ±5 V		17
	Full-power bandwidth⁽¹⁾	V_O(pp) = 20 V, V_CC = ±15 V			3.7
	Full-power bandwidth⁽¹⁾	V_O(pp) = 5 V, V_CC = ±5 V			11.8
SR	Slew rate⁽²⁾	Gain = 10	V_CC = ±15 V, 10-V step		470		V/µs
SR	Slew rate⁽²⁾	Gain = 10	V_CC = ±5 V, 5-V step		370		V/µs
t_s	Settling time to 0.1%	Gain = –10	V_CC = ±15 V, 5-V step		40		ns
	Settling time to 0.1%	Gain = –10	V_CC = ±5 V, 2-V step		50
	Settling time to 0.01%	Gain = –10	V_CC = ±15 V, 5-V step		145
	Settling time to 0.01%	Gain = –10	V_CC = ±5 V, 2-V step		150
NOISE/DISTORTION PERFORMANCE
THD	Total harmonic distortion	V_O(pp) = 2 V, f = 1 MHz, gain = 2, V_CC = ±15 V			–68		dBc
		V_O(pp) = 2 V, f = 1 MHz, gain = 2, V_CC = ±15 V	R_L = 1 kΩ		–77
		V_O(pp) = 2 V, f = 1 MHz, gain = 2, V_CC = ±5 V			–69
		V_O(pp) = 2 V, f = 1 MHz, gain = 2, V_CC = ±5 V	R_L = 1 kΩ		–78
V_n	Input voltage noise	V_CC = ±5 V or ±15 V, f > 10 kHz			1.5		nV/√Hz
I_n	Input current noise	V_CC = ±5 V or ±15 V, f > 10 kHz			2		pA/√Hz
	Differential gain error	Gain = 2, NTSC, 40 IRE modulation, ±100 IRE ramp	V_CC = ±15		0.02		%
	Differential gain error	Gain = 2, NTSC, 40 IRE modulation, ±100 IRE ramp	V_CC = ±5 V		0.02		%
	Differential phase error	Gain = 2, NTSC, 40 IRE modulation, ±100 IRE ramp	V_CC = ±15		0.08		°
	Differential phase error	Gain = 2, NTSC, 40 IRE modulation, ±100 IRE ramp	V_CC = ±5 V		0.06		°
DC PERFORMANCE
	Open-loop gain	V_CC = ±15 V, V_O = ±10 V, R_L = 1 kΩ	T_A = 25°C	40	60		V/mV
		V_CC = ±15 V, V_O = ±10 V, R_L = 1 kΩ	T_A = full range	35
		V_CC = ±5 V, V_O = ±2.5 V, R_L = 250 Ω	T_A = 25°C	20	35
		V_CC = ±5 V, V_O = ±2.5 V, R_L = 250 Ω	T_A = full range	15
V_OS	Input offset voltage	V_CC = ±5 V or ±15 V	T_A = 25°C		0.5	2	mV
V_OS	Input offset voltage	V_CC = ±5 V or ±15 V	T_A = full range			3	mV
	Offset voltage drift	V_CC = ±5 V or ±15 V	T_A = full range		15		µV/°C
I_IB	Input bias current	V_CC = ±5 V or ±15 V	T_A = 25°C		3	6	µA
I_IB	Input bias current	V_CC = ±5 V or ±15 V	T_A = full range			6	µA
I_OS	Input offset current	V_CC = ±5 V or ±15 V	T_A = 25°C		30	250	nA
I_OS	Input offset current	V_CC = ±5 V or ±15 V	T_A = full range			400	nA
	Input offset current drift	T_A = full range			0.3		nA/°C
INPUT CHARACTERISTICS
V_ICR	Common-mode input voltage	V_CC = ±15 V		±13.8	±14.3		V
V_ICR	Common-mode input voltage	V_CC = ±5 V		±3.8	±4.3		V
CMRR	Common-mode rejection ratio	V_CC = ±15 V, V_ICR = ±12 V, T_A = full range		74	95		dB
r_i	Input resistance				1		MΩ
C_i	Input capacitance				1.5		pF
OUTPUT CHARACTERISTICS
V_O	Output voltage swing	V_CC = ±15 V, R_L = 250 Ω		±12	±12.5		V
		V_CC = ±5 V, R_L = 150 Ω		±3	±3.3
		V_CC = ±15 V, R_L = 150 Ω		±13	±13.5
		V_CC = ±5 V, R_L = 150 Ω		±3.4	±3.8
I_O	Output current	R_L = 20 Ω	V_CC = ±15 V	80	100		mA
I_O	Output current	R_L = 20 Ω	V_CC = ±5 V	50	75		mA
I_SC	Short-circuit current⁽³⁾	V_CC = ±15 V			150		mA
R_O	Output resistance⁽³⁾	Open loop			13		Ω
POWER SUPPLY
V_CC	Supply voltage	Dual supply		±4.5		±16.5	V
V_CC	Supply voltage	Single supply		9		33	V
I_CC	Supply current (per amplifier)	V_CC = ±15 V	T_A = 25°C		7.8	10	mA
		V_CC = ±15 V	T_A = full range			11
		V_CC = ±5 V	T_A = 25°C		6.7	9
		V_CC = ±5 V	T_A = full range			10.5
PSRR	Power-supply rejection ratio	V_CC = ±5 V or ±15 V, T_A = full range		80	95		dB

(1) Full-power bandwidth = slew rate / 2π V_O(Peak).

(2) Slew rate is measured from an output level range of 25% to 75%.

(3) Keep junction temperature less than the absolute maximum rating when the output is heavily loaded or shorted; see also Section 5.1.