CD74HCT646

Name: CD74HCT646
Brand: TI
SKU: CD74HCT646
Price: 1.139 USD

正在供货

具有三态输出的高速 CMOS 逻辑八通道总线收发器/寄存器

立即订购

数据表

document-pdfAcrobat CD54HC646, CD74HCT646 数据表 (Rev. B) (英语)

CD74HCT646

正在供货

数据表

立即订购

米6体育平台手机版_好二三四详情

Supply voltage (min) (V)

4.5

Supply voltage (max) (V)

5.5

Number of channels

8

IOL (max) (mA)

6

IOH (max) (mA)

-6

Input type

TTL

Output type

3-State

Features

Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

Technology family

HCT

Rating

Catalog

Operating temperature range (°C)

-55 to 125

Supply voltage (min) (V)

4.5

Supply voltage (max) (V)

5.5

Number of channels

8

IOL (max) (mA)

6

IOH (max) (mA)

-6

Input type

TTL

Output type

3-State

Features

Balanced outputs, High speed (tpd 10-50ns), Positive input clamp diode

Technology family

HCT

Rating

Catalog

Operating temperature range (°C)

-55 to 125

SOIC (DW)

24

159.65 mm² 15.5 x 10.3

2-V to 6-V V_CC Operation (CD54HC646)
4.5-V to 5.5-V V_CC Operation (CD74HCT646)
Wide Operating Temperature Range of –55°C to 125°C
Balanced Propagation Delays and Transition Times
Standard Outputs Drive Up To 15 LS-TTL Loads
Significant Power Reduction Compared to LS-TTL Logic ICs
Inputs Are TTL-Voltage Compatible (CD74HCT646)
Independent Registers for A and B Buses
Multiplexed Real-Time and Stored Data
True Data Paths

2-V to 6-V V_CC Operation (CD54HC646)
4.5-V to 5.5-V V_CC Operation (CD74HCT646)
Wide Operating Temperature Range of –55°C to 125°C
Balanced Propagation Delays and Transition Times
Standard Outputs Drive Up To 15 LS-TTL Loads
Significant Power Reduction Compared to LS-TTL Logic ICs
Inputs Are TTL-Voltage Compatible (CD74HCT646)
Independent Registers for A and B Buses
Multiplexed Real-Time and Stored Data
True Data Paths

The CD54HC646 and CD74HCT646 consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 illustrates the four fundamental bus-management functions that can be performed with these devices.

Output-enable (OE\) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port can be stored in either or both registers.

The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE\ is active (low). In the isolation mode (OE\ high), A data can be stored in one register and/or B data can be stored in the other register.

When an output function is disabled, the input function still is enabled and can be used to store data. Only one of the two buses, A or B, can be driven at a time.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The CD54HC646 and CD74HCT646 consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 illustrates the four fundamental bus-management functions that can be performed with these devices.

Output-enable (OE\) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port can be stored in either or both registers.

The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE\ is active (low). In the isolation mode (OE\ high), A data can be stored in one register and/or B data can be stored in the other register.

When an output function is disabled, the input function still is enabled and can be used to store data. Only one of the two buses, A or B, can be driven at a time.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

filter

查找其他通用收发器

下载