DP83TG721S-Q1
- IEEE802.3bp 1000BASE-T1 compliant
- OA TC10 compliant, <20µA sleep current
- Local and remote wake up and wake forwarding
- Advanced TSN
- IEEE 1588v2/802.1AS Time Synchronization
- Hardware time-stamping with integrated phase correction
- Highly accurate 1pps signal (±15ns)
- Audio Clocking
- AVB IEEE 1722 media clock generation capability
- Phase synchronized wall clock output: 1KHz to 50MHz
- I2S & TDM8 SCLK/FSYNC/MCLK clock generation
- Open Alliance TC12 Interoperability and EMC compliant
- OA EMC compliant
- SAE J2962-3 EMC Compliant
- Integrated LPF on MDI pins
- MAC Interfaces: MII, RMII, RGMII, and SGMII
- Supported I/O voltages: 3.3V, 2.5V, and 1.8V
- Pin compatible with TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs
- Single board design for 100BASE-T1 and 1000BASE-T1 with required BOM change
- Diagnostic tool kit
- Temperature, Voltage, ESD monitor
- Data throughput calculator : Inbuilt MAC packet generator, counter and error checker
- Signal Quality Indicator
- TDR based open and short cable fault detection
- CQI for cable degradation monitoring
- Loopback modes
- AEC-Q100 Qualified
- IEC61000-4-2 ESD : ±8kV contact discharge
The DP83TG721-Q1 is an IEEE 802.3bp and Open Alliance compliant automotive 1000Base-T1 Ethernet physical layer transceiver. The DP83TG721-Q1 provides all physical layer functions needed to transmit and receive data over unshielded/shielded single twisted-pair cables. The device provides xMII flexibility with support for RGMII and SGMII MAC interfaces.
DP83TG721-Q1 supports OA TC10 low power sleep feature (with wake forwarding) to reduce system power consumption when communication is not required. This device offers the Diagnostic Tool Kit, with an extensive list of real-time monitoring tools, debug tools and test modes.
DP83TG721-Q1 integrates IEEE 1588v2/802.1AS hardware time stamping & fractional PLL enabling highly accurate time synchronization. The fractional PLL enables frequency/phase synchronization of the Wall Clock eliminating need for external VCXO and generating wide range of time synchronized frequencies needed for Audio, Video and other ADAS applications.
DP83TG721-Q1 also integrates IEEE 1722 CRF decode to generate Media Clock (wall clock synchronized) for AVB & other Audio standards. The DP83TG721-Q1 is also capable of generating FSYNC/SCLK (wall clock synchronized) for I2S/TDM8 interface needed for audio applications.
The DP83TG721-Q1 is compatible to TI’s 100BASE-T1 PHYs and 1000BASE-T1 PHYs enabling design scalability with single board for both speeds.
申请了解更多信息
可根据保密协议提供完整数据表和其他资源。立即申请
技术文档
| 类型 | 标题 | 下载最新的英语版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 数据表 | DP83TG721x-Q1 1000BASE-T1 Automotive Ethernet PHY with Advanced TSN and AVB 数据表 (Rev. A) | PDF | HTML | 2024年 6月 10日 | ||
| 米6体育平台手机版_好二三四概述 | DP83TG721 具有高级 TSN 和 AVB 的 1000BASE-T1 汽车以 太网 PHY | PDF | HTML | 2024年 7月 18日 | |||
| 应用手册 | How to Integrate Linux Driver Into Your System | PDF | HTML | 2024年 7月 12日 |
设计和开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
DP83TG721EVM-MC — DP83TG721 1000Base-T1 转 1000Base-T 介质转换器评估模块
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短米6体育平台手机版_好二三四上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是米6体育平台手机版_好二三四 (TI) 专有的 DesignSoft 米6体育平台手机版_好二三四。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表
需要 HSpice (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VQFN (RHA) | 36 | Ultra Librarian |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐米6体育平台手机版_好二三四可能包含与 TI 此米6体育平台手机版_好二三四相关的参数、评估模块或参考设计。