TMS320VC5402

Name: TMS320VC5402
Brand: TI
SKU: TMS320VC5402
Price: 6.513 USD

正在供货

数字信号处理器

立即订购

数据表

document-pdfAcrobat TMS320VC5402 Fixed-Point Digital Signal Processor 数据表 (Rev. G) (英语)

勘误

document-pdfAcrobat
TMS320UC5402/TMS320VC5402 Digital Signal Processors Silicon Errata (Rev. D) (英语)

TMS320VC5402

正在供货

数据表

立即订购

米6体育平台手机版_好二三四详情

DSP type

1 C54x

DSP (max) (MHz)

100

CPU

16-bit

Operating system

DSP/BIOS

Rating

Catalog

Operating temperature range (°C)

0 to 0

DSP type

1 C54x

DSP (max) (MHz)

100

CPU

16-bit

Operating system

DSP/BIOS

Rating

Catalog

Operating temperature range (°C)

0 to 0

LQFP (PGE)

144

484 mm² 22 x 22

Advanced Multibus Architecture With Three Separate 16-Bit Data Memory Buses and One Program Memory Bus
40-Bit Arithmetic Logic Unit (ALU), Including a 40-Bit Barrel Shifter and Two Independent 40-Bit Accumulators
17-× 17-Bit Parallel Multiplier Coupled to a 40-Bit Dedicated Adder for Non-Pipelined Single-Cycle Multiply/Accumulate (MAC) Operation
Compare, Select, and Store Unit (CSSU) for the Add/Compare Selection of the Viterbi Operator
Exponent Encoder to Compute an Exponent Value of a 40-Bit Accumulator Value in a Single Cycle
Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic Units (ARAUs)
Data Bus With a Bus-Holder Feature
Extended Addressing Mode for 1M × 16-Bit Maximum Addressable External Program Space
4K x 16-Bit On-Chip ROM
16K x 16-Bit Dual-Access On-Chip RAM
Single-Instruction-Repeat and Block-Repeat Operations for Program Code
Block-Memory-Move Instructions for Efficient Program and Data Management
Instructions With a 32-Bit Long Word Operand
Instructions With Two- or Three-Operand Reads
Arithmetic Instructions With Parallel Store and Parallel Load
Conditional Store Instructions
Fast Return From Interrupt
On-Chip Peripherals
- Software-Programmable Wait-State Generator and Programmable Bank Switching
- On-Chip Phase-Locked Loop (PLL) Clock Generator With Internal Oscillator or External Clock Source
- Two Multichannel Buffered Serial Ports (McBSPs)
- Enhanced 8-Bit Parallel Host-Port Interface (HPI8)
- Two 16-Bit Timers
- Six-Channel Direct Memory Access (DMA) Controller
Power Consumption Control With IDLE1, IDLE2, and IDLE3 Instructions With Power-Down Modes
CLKOUT Off Control to Disable CLKOUT
On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1 (JTAG) Boundary Scan Logic
10-ns Single-Cycle Fixed-Point Instruction Execution Time (100 MIPS) for 3.3-V Power Supply (1.8-V Core)
Available in a 144-Pin Plastic Low-Profile Quad Flatpack (LQFP) (PGE Suffix) and a 144-Pin Ball Grid Array (BGA) (GGU Suffix)

All trademarks are the property of their respective owners.
IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
NOTE:This data sheet is designed to be used in conjunction with the TMS320C5000 DSP Family Functional Overview (literature number SPRU307).

Advanced Multibus Architecture With Three Separate 16-Bit Data Memory Buses and One Program Memory Bus
40-Bit Arithmetic Logic Unit (ALU), Including a 40-Bit Barrel Shifter and Two Independent 40-Bit Accumulators
17-× 17-Bit Parallel Multiplier Coupled to a 40-Bit Dedicated Adder for Non-Pipelined Single-Cycle Multiply/Accumulate (MAC) Operation
Compare, Select, and Store Unit (CSSU) for the Add/Compare Selection of the Viterbi Operator
Exponent Encoder to Compute an Exponent Value of a 40-Bit Accumulator Value in a Single Cycle
Two Address Generators With Eight Auxiliary Registers and Two Auxiliary Register Arithmetic Units (ARAUs)
Data Bus With a Bus-Holder Feature
Extended Addressing Mode for 1M × 16-Bit Maximum Addressable External Program Space
4K x 16-Bit On-Chip ROM
16K x 16-Bit Dual-Access On-Chip RAM
Single-Instruction-Repeat and Block-Repeat Operations for Program Code
Block-Memory-Move Instructions for Efficient Program and Data Management
Instructions With a 32-Bit Long Word Operand
Instructions With Two- or Three-Operand Reads
Arithmetic Instructions With Parallel Store and Parallel Load
Conditional Store Instructions
Fast Return From Interrupt
On-Chip Peripherals
- Software-Programmable Wait-State Generator and Programmable Bank Switching
- On-Chip Phase-Locked Loop (PLL) Clock Generator With Internal Oscillator or External Clock Source
- Two Multichannel Buffered Serial Ports (McBSPs)
- Enhanced 8-Bit Parallel Host-Port Interface (HPI8)
- Two 16-Bit Timers
- Six-Channel Direct Memory Access (DMA) Controller
Power Consumption Control With IDLE1, IDLE2, and IDLE3 Instructions With Power-Down Modes
CLKOUT Off Control to Disable CLKOUT
On-Chip Scan-Based Emulation Logic, IEEE Std 1149.1 (JTAG) Boundary Scan Logic
10-ns Single-Cycle Fixed-Point Instruction Execution Time (100 MIPS) for 3.3-V Power Supply (1.8-V Core)
Available in a 144-Pin Plastic Low-Profile Quad Flatpack (LQFP) (PGE Suffix) and a 144-Pin Ball Grid Array (BGA) (GGU Suffix)

All trademarks are the property of their respective owners.
IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.
NOTE:This data sheet is designed to be used in conjunction with the TMS320C5000 DSP Family Functional Overview (literature number SPRU307).

The TMS320VC5402 fixed-point, digital signal processor (DSP) (hereafter referred to as the '5402 unless otherwise specified) is based on an advanced modified Harvard architecture that has one program memory bus and three data memory buses. This processor provides an arithmetic logic unit (ALU) with a high degree of parallelism, application-specific hardware logic, on-chip memory, and additional on-chip peripherals. The basis of the operational flexibility and speed of this DSP is a highly specialized instruction set.

Separate program and data spaces allow simultaneous access to program instructions and data, providing the high degree of parallelism. Two read operations and one write operation can be performed in a single cycle. Instructions with parallel store and application-specific instructions can fully utilize this architecture. In addition, data can be transferred between data and program spaces. Such parallelism supports a powerful set of arithmetic, logic, and bit-manipulation operations that can be performed in a single machine cycle. In addition, the '5402 includes the control mechanisms to manage interrupts, repeated operations, and function calls.

The TMS320VC5402 fixed-point, digital signal processor (DSP) (hereafter referred to as the '5402 unless otherwise specified) is based on an advanced modified Harvard architecture that has one program memory bus and three data memory buses. This processor provides an arithmetic logic unit (ALU) with a high degree of parallelism, application-specific hardware logic, on-chip memory, and additional on-chip peripherals. The basis of the operational flexibility and speed of this DSP is a highly specialized instruction set.

Separate program and data spaces allow simultaneous access to program instructions and data, providing the high degree of parallelism. Two read operations and one write operation can be performed in a single cycle. Instructions with parallel store and application-specific instructions can fully utilize this architecture. In addition, data can be transferred between data and program spaces. Such parallelism supports a powerful set of arithmetic, logic, and bit-manipulation operations that can be performed in a single machine cycle. In addition, the '5402 includes the control mechanisms to manage interrupts, repeated operations, and function calls.

filter

查找其他数字信号处理器 (DSP)

下载观看带字幕的视频视频

TI 不提供设计支持

TI 不会为该米6体育平台手机版_好二三四的新工程（例如新内容或软件更新）提供持续的设计支持。如可用，您将在米6体育平台手机版_好二三四文件夹中找到相关的配套资料、软件和工具。您也可以在 TI E2E^TM 支持论坛中搜索已归档的信息。

技术文档

star

=有关此米6体育平台手机版_好二三四的 TI 精选热门文档

未找到结果。请清除搜索并重试。

查看全部 14

	类型	标题	日期
*	数据表	TMS320VC5402 Fixed-Point Digital Signal Processor 数据表 (Rev. G)	2008年 10月 20日
*	勘误表	TMS320UC5402/TMS320VC5402 Digital Signal Processors Silicon Errata (Rev. D)	2003年 4月 10日
	应用手册	TMS320VC5402 and TMS320UC5402 Bootloader (Rev. B)	2004年 11月 3日
	用户指南	TMS320C54x Chip Support Library API Reference Guide (Rev. D)	2003年 5月 5日
	应用手册	Using the TMS320C5402 DSK Sine Program and evmdsk54x.dll	2002年 11月 11日
	应用手册	Interfacing the TLV320AIC12/13/14/15 Codec to the TMS320C5402? DSP	2002年 10月 24日
	应用手册	Bootloading the TMS320VC5402 in HPI Mode	2002年 4月 29日
	用户指南	TMS320C54x DSP CPU and Peripherals Reference Set Volume 1 (Rev. G)	2001年 3月 31日
	用户指南	TMS320C54x DSP Algebraic Instruction Set Reference Set Volume 3 (Rev. C)	2001年 1月 31日
	用户指南	TMS320C54x DSP Mnemonic Instruction Set Reference Set Volume 2 (Rev. C)	2001年 1月 31日
	应用手册	Interfacing the TLV320AIC10/11 Codec to the TMS320C5402 DSP	2000年 12月 18日
	应用手册	Powering the TMS320VC5402 DSP Using the TPS60100, TPS76918, and the TPS3305-18	1999年 12月 16日
	应用手册	TPS6010x/TPS6011x Charge Pump (Rev. A)	1999年 12月 16日
	用户指南	TMS320C54x DSP Applications Guide Reference Set Volume 4	1996年 10月 1日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

调试探针

TMDSEMU560V2STM-U — XDS560™ 软件 v2 系统跟踪 USB 调试探针

XDS560v2 是 XDS560™ 系列调试探针中性能非常出色的米6体育平台手机版_好二三四，同时支持传统 JTAG 标准 (IEEE1149.1) 和 cJTAG (IEEE1149.7)。请注意，它不支持串行线调试 (SWD)。

所有 XDS 调试探针在所有具有嵌入式跟踪缓冲器 (ETB) 的 ARM 和 DSP 处理器中均支持内核和系统跟踪。对于引脚上的跟踪，需要 XDS560v2 PRO TRACE。

XDS560v2 通过 MIPI HSPT 60 引脚连接器（带有多个用于 TI 14 引脚、TI 20 引脚和 ARM 20 引脚的适配器）连接到目标板，并通过 USB2.0 高速 (480Mbps) (...)

TI.com 上无现货

调试探针

TMDSEMU560V2STM-UE — Spectrum Digital XDS560v2 系统跟踪 USB 和以太网

XDS560v2 System Trace 是 XDS560v2 系列高性能 TI 处理器调试探针（仿真器）的第一种型号。XDS560v2 是 XDS 系列调试探针中性能最高的一款，同时支持传统 JTAG 标准 (IEEE1149.1) 和 cJTAG (IEEE1149.7)。

XDS560v2 System Trace 在其巨大的外部存储器缓冲区中加入了系统引脚跟踪。这种外部存储器缓冲区适用于指定的 TI 器件，通过捕获相关器件级信息，获得准确的总线性能活动和吞吐量，并对内核和外设进行电源管理。此外，对于带有嵌入式缓冲跟踪器 (ETB) 的所有 ARM 和 DSP 处理器，所有 XDS (...)