1 Features

• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
  • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Device HBM ESD classification level H2
  • Device CDM ESD classification level C4B
• Functional safety capable
  • Documentation available to aid functional safety system design
• Dual-Channel 1000-mΩ smart high-side switch with full diagnostics
  • Version A: Open-drain status output
  • Version B: Current-Sense analog output
• Wide operating voltage 3.4 to 40 V
• Ultralow standby current, <500 nA
• High-Accuracy current sense:
  • ±10% Under >5-mA load
• Adjustable current limit with external resistor ±20% under >100-mA load
• Protection:
  • Short-to-GND protection by current limit (internal or external)
  • Thermal shutdown with latch-off option and thermal swing
  • Inductive load negative voltage clamp with optimized slew rate
  • Loss of GND and loss of battery protection
• Diagnostic:
  • Overcurrent and short-to-ground detection
  • Open-Load and short-to-battery detection
  • Global fault for fast interrupt
• 16-Pin Thermally-Enhanced PWP package