1 Features

• Internal Comparator With Pin Programmable 2°C or 10°C Hysteresis
• No External Components Required
• Open-Drain or Push-Pull Digital Output; Supports CMOS Logic Levels
• Internal Temperature Sensor With V_TEMP Output Pin
• V_TEMP Output Allows After-Assembly System Testing
• Internal Voltage Reference and DAC for Trip-Point Setting
• Currently Available in 5-pin SOT-23 Plastic Package
• Excellent Power Supply Noise Rejection
• UL Recognized Component
• Key Specifications
  • Power Supply Voltage 2.7 V to 5.5 V
  • Power Supply Current
    40 μA (Maximum) 16 μA (Typical)
  • Hysteresis Temperature 2°C or 10°C (Typical)

2 Applications

• Microprocessor Thermal Management
• Appliances
• Portable Battery Powered Systems
• Fan Control
• Industrial Process Control
• HVAC Systems
• Remote Temperature Sensing
• Electronic System Protection

3 Description

The LM26 is a precision, single digital-output, low-power thermostat comprised of an internal reference, DAC, temperature sensor and comparator. Utilizing factory programming, it can be manufactured with different trip points as well as different digital output functionality. The trip point (T_OS) can be preset at the factory to any temperature in the range of −55°C to 110°C in 1°C increments. The LM26 has one digital output (OS/OS/US/US), one digital input (HYST) and one analog output (V_TEMP). The digital output stage can be preset as either open-drain or push-pull. In addition, it can be factory programmed to be active HIGH or LOW. The digital output can be factory programmed to indicate an over temperature shutdown event (OS or OS) or an under temperature shutdown event (US or US). When preset as an overtemperature shutdown (OS) it will go LOW to indicate that the die temperature is over the internally preset T_OS and go HIGH when the temperature goes below (T_OS–T_HYST). Similarly, when preprogrammed as an undertemperature shutdown (US) it will go HIGH to indicate that the temperature is below T_US and go LOW when the temperature is above (T_US+T_HYST). The typical hysteresis, T_HYST, can be set to 2°C or 10°C and is controlled by the state of the HYST pin. A V_TEMP analog output provides a voltage that is proportional to temperature and has a −10.82 mV/°C output slope.

Available parts are detailed in the Device Comparison Table. For other part options, contact a Texas Instruments Distributor or Sales Representative for information on minimum order qualification. The LM26 is currently available in a 5-lead SOT-23 package.

1. For all available packages, see the orderable addendum at the end of the datasheet.

LM26CIM5-TPA Simplified Block Diagram and Connection Diagram

The LM26CIM5-TPA has a fixed trip point of 85°C. For other trip point and output function availability, please see the Device Comparison Table or contact Texas Instruments.