3 说明
ADS54J69 是一款低功耗、高带宽 16 位、500MSPS 双通道模数转换器 (ADC)。该器件经设计具有高信噪比 (SNR),可提供 -159dBFS/Hz 的噪底,从而 协助应用在宽瞬时带宽内 实现最高动态范围。该器件支持 JESD204B 串行接口,数据传输速率高达 10Gbps,每个 ADC 可支持 1 或 2 条通道。经缓冲的模拟输入可在较宽频率范围内提供统一输入阻抗并最大程度地降低采样和保持毛刺脉冲能量。可选择将每条 ADC 通道直接与宽带数字下变频器 (DDC) 模块相连。ADS54J69 以超低功耗在宽输入频率范围内提供出色的无杂散动态范围 (SFDR)。
JESD204B 接口减少了接口线路数,从而实现高系统集成度。内部锁相环 (PLL) 会将 ADC 采样时钟加倍,以获得串行化各通道的 16 位数据时所使用的位时钟。
器件信息
器件编号 |
封装 |
封装尺寸(标称值) |
ADS54J69 |
VQFNP (72) |
10.00mm x 10.00mm |
- 要了解所有可用封装,请参见数据表末尾的可订购米6体育平台手机版_好二三四附录。
4 修订历史记录
Changes from B Revision (February 2016) to C Revision
-
Added Device Comparison TableGo
-
Added the FOVR latency parameter to the Timing Characteristics tableGo
-
Added SYSREF Not Present (Subclass 0, 2) sectionGo
-
Changed the number of clock cycles in the Fast OVR sectionGo
-
Changed the Register MapGo
-
Deleted register 39h, 3Ah, and 56h Go
-
Changed the SNR versus Input Frequency and External Clock Jitter figureGo
-
Changed Power Supply Recommendations section Go
-
Added the Power Sequencing and Initialization sectionGo
-
Added 文档支持和接收文档更新通知部分Go
-
Added 接收文档更新通知部分Go
Changes from A Revision (January 2016) to B Revision
-
Changed Sample Timing, Aperture jitter parameter in Timing Characteristics table Go
-
Changed Table 35Go
-
Changed Table 42Go
-
Changed Table 44Go
-
Changed SNR and Clock Jitter section: changed Figure 130 and last sentence of sectionGo
-
Changed Application Curves section Go
Changes from * Revision (May 2015) to A Revision