SNAU298A October   2023  – October 2024

1.   1
2.   Description
3.   Features
4.   Applications
5.   5
6. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Kit Contents
   3. 1.3 Specification
   4. 1.4 Device Information
7. 2EVM Quick Start
   1. 2.1 Hardware Setup
   2. 2.2 Software Setup
      1. 2.2.1 TICS Pro GUI Setup
      2. 2.2.2 Power Up Sequence
   3. 2.3 EVM Measurements
8. 3Hardware
   1. 3.1 Device Operation Modes
   2. 3.2 EVM Configuration
      1. 3.2.1 Power Supply
      2. 3.2.2 Logic Input and Outputs
      3. 3.2.3 Clock Input
      4. 3.2.4 Clock Outputs
      5. 3.2.5 Status Outputs, LEDs, and Test Points
9. 4Software
   1. 4.1 TICS Pro LMKDB1120 Software
      1. 4.1.1 Input
         1. 4.1.1.1 Input Interface Type
         2. 4.1.1.2 Input Termination
         3. 4.1.1.3 Automatic Output Disable (AOD)
         4. 4.1.1.4 LOS Event
         5. 4.1.1.5 LOS Readback
      2. 4.1.2 Device Info and EVM Setup
         1. 4.1.2.1 Device Info
         2. 4.1.2.2 EVM Setup
         3. 4.1.2.3 SMBus
      3. 4.1.3 Output
         1. 4.1.3.1 SMBus
            1. 4.1.3.1.1 Programmable Output Slew Rate Control
         2. 4.1.3.2 OE Pin Control
         3. 4.1.3.3 Side Band Interface (SBI)
10. 5Implementation Results
    1. 5.1 Typical Phase Noise Characteristic
11. 6Hardware Design Files
    1. 6.1 Schematics
    2. 6.2 PCB Layouts
    3. 6.3 Bill of Materials (BOM)
12. 7Compliance Information
    1. 7.1 Compliance and Certifications
13. 8References
14. 9Revision History

LMKDB1120 Evaluation Module