SWRU629 September   2024

1.   1
2.   Description
3.   Features
4.   4
5. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Kit Contents
   3. 1.3 Specification
   4. 1.4 Device Information
6. 2Hardware
   1. 2.1 Wired Connections, Jumper Settings, Buttons, and LEDs
      1. 2.1.1  SWD Interface
      2. 2.1.2  I2C Connections
         1. 2.1.2.1 Default I2C Addresses
      3. 2.1.3  UART Signals
      4. 2.1.4  SD Card Interface
      5. 2.1.5  External Memory Interface
      6. 2.1.6  ADC Interface
      7. 2.1.7  Reset Pull-up Jumper
      8. 2.1.8  Push Buttons
      9. 2.1.9  LED Indicators
      10. 2.1.10 LaunchPad Header Pin Assignment
   2. 2.2 Power
      1. 2.2.1 VIO Selection
      2. 2.2.2 Measure the CC35xxE Current Draw
         1. 2.2.2.1 Low Current Measurement (LPDS)
         2. 2.2.2.2 Active Current Measurement
   3. 2.3 Clocking
   4. 2.4 Conducted RF Testing
   5. 2.5 Evaluation Setup
      1. 2.5.1 Wi-Fi Toolbox LP-EM-CC35X1 Hardware Setup
7. 3Hardware Design Files
   1. 3.1 Schematics
   2. 3.2 PCB Layouts
   3. 3.3 Bill of Materials (BOM)
8. 4Additional Information
   1. 4.1 Trademarks

CC35xxE LaunchPad™ Development Kit for SimpleLink™ Wi-Fi 6 and Bluetooth® Low Energy Wireless MCU