SBOA444 November   2020 TMCS1100

 

  1.   Trademarks
  2. 1Introduction
  3. 2Implementation Block Diagram
  4. 3Hardware Implemenation
    1. 3.1 Analog Inputs
      1. 3.1.1 Voltage Measurement Analog Front End
      2. 3.1.2 Current Measurement Analog Front End
    2. 3.2 MSP432 LaunchPad Connections
    3. 3.3 PCB Layout Recommendations
  5. 4How to Implement Software for Metrology Testing
    1. 4.1 Setup
      1. 4.1.1 Clock
      2. 4.1.2 UART Setup for GUI Communication
      3. 4.1.3 Real-Time Clock (RTC)
      4. 4.1.4 Direct Memory Access (DMA)
      5. 4.1.5 ADC Setup
    2. 4.2 Foreground Process
      1. 4.2.1 Formulas
        1. 4.2.1.1 Standard Metrology Parameters
        2. 4.2.1.2 Power Quality Formulas
    3. 4.3 Background Process
      1. 4.3.1 per_sample_dsp( )
        1. 4.3.1.1 Voltage and Current ADC Samples
        2. 4.3.1.2 Pure Waveform Samples
        3. 4.3.1.3 Frequency Measurement and Cycle Tracking
      2. 4.3.2 LED Pulse Generation
      3. 4.3.3 Phase Compensation
  6. 5Metrology Accuracy Testing
    1. 5.1 Test Setup
    2. 5.2 Results
  7. 6Schematics
  8. 7References

Trademarks

LaunchPad are trademarks of Texas Instruments Incorporated.

All trademarks are the property of their respective owners.