SBOA600 July   2024 ISOTMP35

1.   1
2.   Abstract
3.   Trademarks
4. 1Introduction
   1. 1.1 Calculating Thermal Response Time
   2. 1.2 Current Design with Non-Isolated Temperature Sensors
   3. 1.3 Proposed Design Using the ISOTMP35 Isolated Temperature Sensor
5. 2Experiment Setup
   1. 2.1 Step 1: Prepare the Oil Bath
   2. 2.2 Step 2: Prepare the Liquid Gallium
   3. 2.3 Step 3: Submerge the Copper Pad
   4. 2.4 Step 4: Prepare Each PCB Configuration
   5. 2.5 Step 5: Testing Each PCB Configuration
   6. 2.6 Test Results
6. 3Summary
7. 4References

Improving Thermal Response Time and Accuracy in High-Voltage Applications