SNAU298 October   2023

1.   1
2.   Description
3.   Features
4.   Applications
5.   5
6. 1Evaluation Module Overview
   1. 1.1 Introduction
   2. 1.2 Kit Contents
   3. 1.3 Specification
   4. 1.4 Device Information
7. 2Hardware
   1. 2.1 EVM Quick Start
      1. 2.1.1 Hardware Setup
      2. 2.1.2 Measure
   2. 2.2 Device Operation Modes
   3. 2.3 EVM Configuration
      1. 2.3.1 Power Supply
      2. 2.3.2 Logic Input and Outputs
      3. 2.3.3 Clock Input
      4. 2.3.4 Clock Outputs
      5. 2.3.5 Status Outputs, LEDs, and Test Points
8. 3Software
   1. 3.1 Software Installation
      1. 3.1.1 Software Setup
      2. 3.1.2 Program and Setup
   2. 3.2 TICS Pro LMKDB1120 Software
      1. 3.2.1 Input
         1. 3.2.1.1 Input Interface Type
         2. 3.2.1.2 Input Termination
         3. 3.2.1.3 Automatic Output Disable (AOD)
         4. 3.2.1.4 LOS Event
         5. 3.2.1.5 LOS Readback
      2. 3.2.2 Device Info
         1. 3.2.2.1 EVM Setup
         2. 3.2.2.2 SMBus
      3. 3.2.3 Output
         1. 3.2.3.1 SMBus
         2. 3.2.3.2 OE Pin Control
         3. 3.2.3.3 Side Band Interface (SBI)
9. 4Implementation Results
   1. 4.1 Typical Phase Noise Characteristic
10. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
11. 6Compliance Information
    1. 6.1 Compliance and Certifications
12. 7References

LMKDB1120 Evaluation Module