SNVAA82 august   2023 LMR38020

1.   1
2.   Abstract
3.   Trademarks
4. 1Introduction
5. 2Fly-Buck Converter
6. 3Fly-Buck Basic Operation
   1. 3.1 Basic Intervals of Steady State Operation
   2. 3.2 Impact Of Leakage Inductor On Fly-Buck Operation
7. 4Design A Fly-Buck Converter with LMR38020
   1. 4.1 IC Select
   2. 4.2 Switching Frequency Set
   3. 4.3 Transformer Design
      1. 4.3.1 Turns Ratio
      2. 4.3.2 Magnetic Inductance
      3. 4.3.3 Check Ipk
   4. 4.4 Output Capacitor Selection
      1. 4.4.1 Primary Output Capacitor
      2. 4.4.2 Secondary Output Capacitor
   5. 4.5 Secondary Output Diode
   6. 4.6 Preload Resistor
8. 5Bench Test Results
   1. 5.1 Typical Switching Waveforms Under Steady State
   2. 5.2 Start Up
   3. 5.3 Efficiency
   4. 5.4 Load Regulation
   5. 5.5 Short Circuit
   6. 5.6 Thermal Performance
9. 6Design Considerations
10. 7Summary
11. 8References

Designing an Isolated Buck Converter using the LMR38020