1 Features

AEC-Q100 (Grade 0) Qualified for automotive applications
Meets the requirements of ISO 11898-2:2016 physical layer standard
Functional Safety-Capable
- Documentation available to aid in functional safety system design
Support of classical CAN and optimized CAN FD performance at 2, 5, and 8 Mbps
- Short and symmetrical propagation delays for enhanced timing margin
I/O voltage range supports 1.7 V to 5.5 V
Support for 12-V and 24-V battery applications
Receiver common mode input voltage: ±12 V
Protection features:
- Bus fault protection: ±58 V
- Undervoltage protection
- TXD-dominant time-out (DTO)
  - Data rates down to 9.2 kbps
- Thermal-shutdown protection (TSD)
Operating modes:
- Normal mode
- Low power standby mode supporting remote wake-up request
Optimized behavior when unpowered
- Bus and logic pins are high impedance (no load to operating bus or application)
- Hot-plug capable: power up/down glitch-free operation on bus and RXD output
8-Pin SOIC and small footprint SOT-23 package