LM22677-Q1

Name: LM22677-Q1
Brand: TI
SKU: LM22677-Q1
Price: 2.856 USD

ACTIVE

5A SIMPLE SWITCHER, Step-Down Voltage Reg. with Synchronization or Adjustable Switching Frequency

Order now

Data sheet

document-pdfAcrobat LM22677/-Q1 42-V, 5-A SIMPLE SWITCHER, Step-Down Voltage Regulator With Features datasheet (Rev. O) PDF | HTML

A newer version of this product is available

open-in-new

Compare alternates

This product continues to be available for existing customers. New designs should consider an alternate product.

Same functionality with different pin-out to the compared device

NEW LM63460-Q1

ACTIVE

Automotive 3-V to 36-V, 6-A, low EMI synchronous step-down converter in enhanced QFN package Smaller device footprint, enhanced HotRod™ QFN package, spread spectrum and selectable FPWM or PFM modes.

LM22677-Q1

ACTIVE

Data sheet

Order now

Product details

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

4.5

Vin (max) (V)

42

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1000

Features

Enable, Frequency synchronization, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.285

Vout (max) (V)

37

Iq (typ) (µA)

3400

Duty cycle (max) (%)

90

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

4.5

Vin (max) (V)

42

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1000

Features

Enable, Frequency synchronization, Over Current Protection, Soft Start Fixed

Control mode

Voltage mode

Vout (min) (V)

1.285

Vout (max) (V)

37

Iq (typ) (µA)

3400

Duty cycle (max) (%)

90

TO-263 (NDR)

7

142.3416 mm² 10.16 x 14.01

Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable With Low ESR Ceramic Capacitors
100-mΩ N-Channel MOSFET
Output Voltage Options:
- -ADJ (Outputs as Low as 1.285 V)
- -5.0 (Output Fixed to 5 V)
±1.5% Feedback Reference Accuracy
500-kHz Default Switching Frequency
Adjustable Switching Frequency and
Synchronization
–40°C to +125°C Operating Junction Temperature
Range
Precision Enable Input
Integrated Boot-Strap Diode
Integrated Soft-Start
Fully WEBENCH^® Enabled
LM22677-Q1 is an Automotive-Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
NDR (Exposed Pad)

Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable With Low ESR Ceramic Capacitors
100-mΩ N-Channel MOSFET
Output Voltage Options:
- -ADJ (Outputs as Low as 1.285 V)
- -5.0 (Output Fixed to 5 V)
±1.5% Feedback Reference Accuracy
500-kHz Default Switching Frequency
Adjustable Switching Frequency and
Synchronization
–40°C to +125°C Operating Junction Temperature
Range
Precision Enable Input
Integrated Boot-Strap Diode
Integrated Soft-Start
Fully WEBENCH^® Enabled
LM22677-Q1 is an Automotive-Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
NDR (Exposed Pad)

The LM22677 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz, thus allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). The LM22677 also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22677 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER^® concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI's WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

The LM22677 switching regulator provides all of the functions necessary to implement an efficient high-voltage step-down (buck) regulator using a minimum of external components. This easy-to-use regulator incorporates a 42-V N-channel MOSFET switch that can provide up to 5 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5-V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz, thus allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typical). The LM22677 also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22677 device is a member of Texas Instruments’ SIMPLE SWITCHER family. The SIMPLE SWITCHER^® concept provides for an easy-to-use complete design using a minimum number of external components and the TI WEBENCH design tool. TI's WEBENCH tool includes features such as external component calculation, electrical simulation, thermal simulation, and Build-It boards for easy design-in.

filter

Find other AC/DC & DC/DC converters (integrated FET)

Download View video with transcript Video

Similar products you might be interested in

open-in-new

Compare alternates

Same functionality with different pin-out to the compared device

LM61460-Q1

ACTIVE

Automotive 3-V to 36-V, 6-A, low-noise synchronous step-down converter Smaller solution size, higher efficiency at light load, lower EMI with HotRod™ QFN packaging and spread spectrum.

LMR33630-Q1

ACTIVE

3.8-V to 36-V, 3-A synchronous step-down voltage converter Smaller footprint and improved EMI performance.

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 18

	Type	Title		Date
*	Data sheet	LM22677/-Q1 42-V, 5-A SIMPLE SWITCHER, Step-Down Voltage Regulator With Features datasheet (Rev. O)	PDF \| HTML	11 Aug 2015
	Application note	Semiconductor and IC Package Thermal Metrics (Rev. D)	PDF \| HTML	25 Mar 2024
	Application note	Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)		12 Sep 2014
	Application note	AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A)		06 May 2013
	EVM User's guide	AN-1892 LM22677 Evaluation Board (Rev. D)		24 Apr 2013
	Application note	AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)		24 Apr 2013
	Application note	AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)		23 Apr 2013
	Application note	AN-1197 Selecting Inductors for Buck Converters (Rev. B)		23 Apr 2013
	Application note	AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)		23 Apr 2013
	Application note	AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)		23 Apr 2013
	Application note	AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)		23 Apr 2013
	Application note	AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)		23 Apr 2013
	Application note	AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)		23 Apr 2013
	Application note	AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)		23 Apr 2013
	Design guide	SIMPLE SWITCHER® Design Guide		11 Apr 2011
	Application note	Input and Output Capacitor Selection		19 Sep 2005
	More literature	SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations		12 Jul 2005
	Application note	AN-643 EMI/RFI Board Design (Rev. B)		03 May 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LM22677EVAL — LM22677 5A SIMPLE SWITCHER Regulator w/ Freq Adj or Synch and Precision Enable EVM

The LM22677 evaluation board is designed to demonstrate the capabilities of the LM22677 switching regulator. The LM22677 evaluation board schematic shown in Figure 1 is configured to provide an output voltage of 3.3V up to 5A load current with an input voltage range of 4.5V to 42V. Due to the low (...)

User guide: PDF