All trademarks are the property of their respective owners.
Ideal for space critical applications, the LM4128 precision voltage reference is available in the SOT-23 surface-mount package. The LM4128’s advanced design eliminates the need for an external stabilizing capacitor while ensuring stability with capacitive loads up to 10 µF, thus making the LM4128 easy to use.
Series references provide lower power consumption than shunt references, since they do not have to idle the maximum possible load current under no load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4128 ideal for battery-powered solutions.
The LM4128 is available in four grades (A, B, C, and D) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.1% with ensured temperature coefficient of 75 ppm/°C or less, while the lowest grade parts (D) have an initial accuracy of 1.0% and a tempco of 100 ppm/°C.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | LM4128/LM4128Q SOT-23 Precision Micropower Series Voltage Reference datasheet (Rev. E) | 29 Mar 2013 | |
| Application note | Voltage Reference Selection and Design Tips For Data Converters (Rev. B) | PDF | HTML | 09 Jan 2024 | |
| E-book | Tips and tricks for designing with voltage references (Rev. A) | 07 May 2021 | ||
| Functional safety information | LM4128, LM4128-Q1 Functional Safety FIT Rate and Failure Mode Distribution (Rev. A) | PDF | HTML | 18 Dec 2019 | |
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 28 Jun 2019 | ||
| White paper | Voltage reference selection basics white paper (Rev. A) | 23 Oct 2018 | ||
| Technical article | Speeding through the ADAS market 0-60 | PDF | HTML | 07 Dec 2015 | |
| Application note | AN-1984 LM57 Temperature Switch vs Thermistors (Rev. C) | 01 May 2013 |
For additional terms or required resources, click any title below to view the detail page where available.
Speed up your op amp prototyping and testing with the DIP adapter evaluation module (DIP-ADAPTER-EVM), which provides a fast, easy and inexpensive way to interface with small surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them (...)
| Package | Pins | CAD symbols, footprints & 3D models |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.