or GreaterThe SN64BCT25245 is a 25-
octal bus transceiver designed for asynchronous communication between
data buses. It improves both the performance and density of 3-state
memory address drivers, clock drivers, and bus-oriented transceivers.
The device allows data transmission from the A bus to the B bus or
from the B bus to the A bus depending upon the logic level at the
direction-control (DIR) input. The output-enable (
) input can disable the device so
that both buses are effectively isolated.
This transceiver is capable of sinking 188-mA IOL,
which facilitates switching 25- transmission lines on the incident wave. The
distributed VCC and GND pins minimize switching noise for
more reliable system operation.
The outputs are in a high-impedance state during power up and power down while the supply voltage is less than approximately 3 V.
The SN64BCT25245 is characterized for operation from -40°C to 85°C and 0°C to 70°C.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | 25 Ohm Octal Bus Transceiver datasheet (Rev. A) | 01 Dec 1993 |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.