SN74LVTH244A

Name: SN74LVTH244A
Brand: TI
SKU: SN74LVTH244A
Price: 0.269 USD

ACTIVE

8-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state outputs

Order now

Data sheet

document-pdfAcrobat SN54LVTH244A, SN74LVTH244A datasheet (Rev. J)

SN74LVTH244A

ACTIVE

Data sheet

Order now

Product details

Technology family

LVT

Supply voltage (min) (V)

2.7

Supply voltage (max) (V)

3.6

Number of channels

8

IOL (max) (mA)

64

Supply current (max) (µA)

5000

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Power up 3-state, Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Technology family

LVT

Supply voltage (min) (V)

2.7

Supply voltage (max) (V)

3.6

Number of channels

8

IOL (max) (mA)

64

Supply current (max) (µA)

5000

IOH (max) (mA)

-32

Input type

TTL-Compatible CMOS

Output type

3-State

Features

Bus-hold, Over-voltage tolerant inputs, Partial power down (Ioff), Power up 3-state, Ultra high speed (tpd <5ns)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SOP (NS)

20

98.28 mm² 12.6 x 7.8

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

TSSOP (PW)

20

41.6 mm² 6.5 x 6.4

VQFN (RGY)

20

15.75 mm² 4.5 x 3.5

Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
Support Unregulated Battery Operation Down to 2.7 V
I_off and Power-Up 3-State Support Hot Insertion
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 500 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V V_CC)
Typical V_OLP (Output Ground Bounce)
<0.8 V at V_CC = 3.3 V, T_A = 25°C
Support Unregulated Battery Operation Down to 2.7 V
I_off and Power-Up 3-State Support Hot Insertion
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 500 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

These octal buffers and line drivers are designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The ’LVTH244A devices are organized as two 4-bit line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the devices pass data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

These devices are fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

These octal buffers and line drivers are designed specifically for low-voltage (3.3-V) V_CC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The ’LVTH244A devices are organized as two 4-bit line drivers with separate output-enable (OE)\ inputs. When OE\ is low, the devices pass data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

These devices are fully specified for hot-insertion applications using I_off and power-up 3-state. The I_off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.

filter

Find other Noninverting buffers & drivers

Download View video with transcript Video

Similar products you might be interested in

open-in-new

Compare alternates

Drop-in replacement with upgraded functionality to the compared device

CD74ACT244

ACTIVE

8-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs Voltage range (4.5V to 5.5V)

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 17

	Type	Title	Date
*	Data sheet	SN54LVTH244A, SN74LVTH244A datasheet (Rev. J)	08 Oct 2003
	Application note	Implications of Slow or Floating CMOS Inputs (Rev. E)	26 Jul 2021
	Application note	An Overview of Bus-Hold Circuit and the Applications (Rev. B)	17 Sep 2018
	Selection guide	Logic Guide (Rev. AB)	12 Jun 2017
	Application note	Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)	02 Dec 2015
	User guide	LOGIC Pocket Data Book (Rev. B)	16 Jan 2007
	Application note	Semiconductor Packing Material Electrostatic Discharge (ESD) Protection	08 Jul 2004
	Application note	TI IBIS File Creation, Validation, and Distribution Processes	29 Aug 2002
	Application note	16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B)	22 May 2002
	Application note	Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices	10 May 2002
	Selection guide	Advanced Bus Interface Logic Selection Guide	09 Jan 2001
	Application note	LVT-to-LVTH Conversion	08 Dec 1998
	Application note	LVT Family Characteristics (Rev. A)	01 Mar 1998
	Application note	Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)	01 Aug 1997
	Application note	Input and Output Characteristics of Digital Integrated Circuits	01 Oct 1996
	Application note	Live Insertion	01 Oct 1996
	Application note	Understanding Advanced Bus-Interface Products Design Guide	01 May 1996

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

14-24-LOGIC-EVM — Logic product generic evaluation module for 14-pin to 24-pin D, DB, DGV, DW, DYY, NS and PW packages

The 14-24-LOGIC-EVM evaluation module (EVM) is designed to support any logic device that is in a 14-pin to 24-pin D, DW, DB, NS, PW, DYY or DGV package,

User guide: PDF | HTML

Not available on TI.com

Evaluation board

14-24-NL-LOGIC-EVM — Logic product generic evaluation module for 14-pin to 24-pin non-leaded packages

14-24-NL-LOGIC-EVM is a flexible evaluation module (EVM) designed to support any logic or translation device that has a 14-pin to 24-pin BQA, BQB, RGY, RSV, RJW or RHL package.

User guide: PDF | HTML