THS1206

ACTIVE

12-Bit, 6 MSPS ADC Quad Ch. (Config.), DSP/uP IF, Integ. 16x FIFO, Channel AutoScan, Low Power

Order now

Data sheet

document-pdfAcrobat THS1206: 12-Bit, 6 MSPS, Simultaneous Sampling Analog-to-Digital Converter datasheet (Rev. H)

THS1206

ACTIVE

Data sheet

Order now

Product details

Resolution (bps)

12

Sample rate (max) (ksps)

6000

Number of input channels

4

Interface type

Parallel

Architecture

Pipeline

Input type

Differential, Single-ended

Multichannel configuration

Simultaneous Sampling

Rating

Automotive, Catalog

Reference mode

External, Internal

Input voltage range (max) (V)

4

Input voltage range (min) (V)

1.4

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

186

Analog supply (min) (V)

4.75

Analog supply voltage (max) (V)

5.25

SNR (dB)

69

Digital supply (min) (V)

3

Digital supply (max) (V)

5.25

Resolution (bps)

12

Sample rate (max) (ksps)

6000

Number of input channels

4

Interface type

Parallel

Architecture

Pipeline

Input type

Differential, Single-ended

Multichannel configuration

Simultaneous Sampling

Rating

Automotive, Catalog

Reference mode

External, Internal

Input voltage range (max) (V)

4

Input voltage range (min) (V)

1.4

Operating temperature range (°C)

-40 to 125

Power consumption (typ) (mW)

186

Analog supply (min) (V)

4.75

Analog supply voltage (max) (V)

5.25

SNR (dB)

69

Digital supply (min) (V)

3

Digital supply (max) (V)

5.25

TSSOP (DA)

32

89.1 mm² 11 x 8.1

High-Speed 6 MSPS ADC
4 Analog Inputs
Simultaneous Sampling of 4 Single-Ended Signals or 2 Differential Signals or Combination of Both
Differential Nonlinearity Error: ±1 LSB
Integral Nonlinearity Error: ±1.5 LSB
Signal-to-Noise and Distortion Ratio: 68 dB at f_I = 2 MHz
Auto-Scan Mode for 2, 3, or 4 Inputs
3-V or 5-V Digital Interface Compatible
Low Power: 216 mW Max
5-V Analog Single Supply Operation
Internal Voltage References ...50 PPM/°C and ±5% Accuracy
Glueless DSP Interface
Parallel µC/DSP Interface
Integrated FIFO
Available in TSSOP Package
Pin Compatible Upgrade to THS10064
APPLICATIONS
- Radar Applications
- Communications
- Control Applications
- High-Speed DSP Front-End
- Automotive Applications

High-Speed 6 MSPS ADC
4 Analog Inputs
Simultaneous Sampling of 4 Single-Ended Signals or 2 Differential Signals or Combination of Both
Differential Nonlinearity Error: ±1 LSB
Integral Nonlinearity Error: ±1.5 LSB
Signal-to-Noise and Distortion Ratio: 68 dB at f_I = 2 MHz
Auto-Scan Mode for 2, 3, or 4 Inputs
3-V or 5-V Digital Interface Compatible
Low Power: 216 mW Max
5-V Analog Single Supply Operation
Internal Voltage References ...50 PPM/°C and ±5% Accuracy
Glueless DSP Interface
Parallel µC/DSP Interface
Integrated FIFO
Available in TSSOP Package
Pin Compatible Upgrade to THS10064
APPLICATIONS
- Radar Applications
- Communications
- Control Applications
- High-Speed DSP Front-End
- Automotive Applications

The THS1206 is a CMOS, low-power, 12-bit, 6 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers are used to program the ADC into the desired mode. The THS1206 consists of four analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load off of the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided.

An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In single conversion mode, a single and simultaneous conversion of up to four inputs can be initiated by using the single conversion start signal (CONVST)\. The conversion clock in single conversion mode is generated internally using a clock oscillator circuit. In continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS1206. The internal clock oscillator is switched off in continuous conversion mode.

The THS1206C is characterized for operation from 0°C to 70°C, the THS1206I is characterized for operation from –40°C to 85°C, the THS1206Q is characterized to meet the rigorous requirements of the automotive environment from –40°C to 125°C, and the THS1206M is characterized for operation over the full military temperature range of –55°C to 125°C.

The THS1206 is a CMOS, low-power, 12-bit, 6 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers are used to program the ADC into the desired mode. The THS1206 consists of four analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load off of the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided.

An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In single conversion mode, a single and simultaneous conversion of up to four inputs can be initiated by using the single conversion start signal (CONVST)\. The conversion clock in single conversion mode is generated internally using a clock oscillator circuit. In continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS1206. The internal clock oscillator is switched off in continuous conversion mode.

The THS1206C is characterized for operation from 0°C to 70°C, the THS1206I is characterized for operation from –40°C to 85°C, the THS1206Q is characterized to meet the rigorous requirements of the automotive environment from –40°C to 125°C, and the THS1206M is characterized for operation over the full military temperature range of –55°C to 125°C.

filter

Find other Precision ADCs

Download