TLV2543

ACTIVE

12-Bit 66 kSPS ADC Ser. Out, Pgrmable Pwrdn, MSB/LSB First, Built-In Self-Test Mode, 11 Ch.

Order now

Data sheet

document-pdfAcrobat 12-Bit Analog-to-Digital Converters With Serial Control And 11 Analog Inputs datasheet (Rev. C)

TLV2543

ACTIVE

Data sheet

Order now

Product details

Resolution (bps)

12

Sample rate (max) (ksps)

66

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

3.6

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3.3

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Digital supply (min) (V)

3

Digital supply (max) (V)

3.6

Resolution (bps)

12

Sample rate (max) (ksps)

66

Number of input channels

11

Interface type

SPI

Architecture

SAR

Input type

Single-ended

Multichannel configuration

Multiplexed

Rating

Catalog

Reference mode

External

Input voltage range (max) (V)

3.6

Input voltage range (min) (V)

0

Operating temperature range (°C)

-40 to 85

Power consumption (typ) (mW)

3.3

Analog supply (min) (V)

3

Analog supply voltage (max) (V)

3.6

Digital supply (min) (V)

3

Digital supply (max) (V)

3.6

PDIP (N)

20

228.702 mm² 24.33 x 9.4

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

SSOP (DB)

20

56.16 mm² 7.2 x 7.8

12-Bit-Resolution A/D Converter
10-us Conversion Time Over Operating Temperature Range
11 Analog Input Channels
3 Built-In Self-Test Modes
Inherent Sample and Hold Function
Linearity Error...±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Unipolar or Bipolar Output Operation (Signed Binary With Respect to Half of the Applied Referenced Voltage)
Programmable MSB or LSB First
Programmable Power Down
Programmable Output Data Length
CMOS Technology

12-Bit-Resolution A/D Converter
10-us Conversion Time Over Operating Temperature Range
11 Analog Input Channels
3 Built-In Self-Test Modes
Inherent Sample and Hold Function
Linearity Error...±1 LSB Max
On-Chip System Clock
End-of-Conversion (EOC) Output
Unipolar or Bipolar Output Operation (Signed Binary With Respect to Half of the Applied Referenced Voltage)
Programmable MSB or LSB First
Programmable Power Down
Programmable Output Data Length
CMOS Technology

The TLV2543C and TLV2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital converters (ADCs). Each device has three control inputs [chip select (CS\), the input-output clock (I/O CLOCK), and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLV2543 is available in the DW, DB, and N packages. The TLV2543C is characterized for operation from 0°C to 70°C, and the TLV2543I is characterized for operation from -40°C to 85°C.

The TLV2543C and TLV2543I are 12-bit, switched-capacitor, successive-approximation, analog-to-digital converters (ADCs). Each device has three control inputs [chip select (CS\), the input-output clock (I/O CLOCK), and the address input (DATA INPUT)] and is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any one of 11 inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLV2543 is available in the DW, DB, and N packages. The TLV2543C is characterized for operation from 0°C to 70°C, and the TLV2543I is characterized for operation from -40°C to 85°C.

filter

Find other Precision ADCs

Download