Home Power management Linear & low-dropout (LDO) regulators
Home
Power management
Linear & low-dropout (LDO) regulators

TLV760

ACTIVE

100-mA, 30-V, low-dropout voltage regulator

Order now
Data sheet

A newer version of this product is available

open-in-new Compare alternates
This product continues to be available for existing customers. New designs should consider an alternate product.
Same functionality with different pin-out to the compared device
TLV709 ACTIVE 150-mA 30-V low-dropout (LDO) linear regulator with 3.2-μA supply current Newer process technology and better specifications in Industry standard package

TLV760

ACTIVE
Data sheet Order now

Product details

Output options Fixed Output Iout (max) (A) 0.1 Vin (max) (V) 30 Vin (min) (V) 4.2 Vout (max) (V) 15 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5, 12, 15 Noise (µVrms) 100 Iq (typ) (mA) 2 Thermal resistance θJA (°C/W) 270 Rating Catalog Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 4 PSRR at 100 KHz (dB) 45 Dropout voltage (Vdo) (typ) (mV) 700 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.1 Vin (max) (V) 30 Vin (min) (V) 4.2 Vout (max) (V) 15 Vout (min) (V) 3.3 Fixed output options (V) 3.3, 5, 12, 15 Noise (µVrms) 100 Iq (typ) (mA) 2 Thermal resistance θJA (°C/W) 270 Rating Catalog Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 4 PSRR at 100 KHz (dB) 45 Dropout voltage (Vdo) (typ) (mV) 700 Operating temperature range (°C) -40 to 125
SOT-23 (DBZ) 3 6.9204 mm² 2.92 x 2.37
  • Wide Input Voltage Range up to 30 V
  • Output Current up to 100 mA
  • Available in Fixed Output Voltage 3.3-V, 5-V, 12-V and 15-V Versions
  • Operating Junction Temperature −40°C to +125°C
  • Stable With Ceramic Capacitors Greater Than or Equal to 0.1 µF
  • Active Thermal Protection and Current Limit
  • Wide Input Voltage Range up to 30 V
  • Output Current up to 100 mA
  • Available in Fixed Output Voltage 3.3-V, 5-V, 12-V and 15-V Versions
  • Operating Junction Temperature −40°C to +125°C
  • Stable With Ceramic Capacitors Greater Than or Equal to 0.1 µF
  • Active Thermal Protection and Current Limit

The TLV760 is an integrated linear-voltage regulator featuring operation from an input as high as 30 V. The TLV760 has a maximum dropout of 1.2 V at the full 100-mA load across operating temperature. Standard packaging for the TLV760 is the 3-pin SOT-23 package.

The TLV760 is available in 3.3 V, 5 V, 12 V and 15 V. The SOT-23 packaging of the TLV760 series allows the device to be used in space-constrained applications. The TLV760 is a small size alternative to LM78Lxx series and similar devices.

The TLV760 is designed to bias digital and analog circuits in applications that are subject to voltage transients and spikes up to 30 V — for example, appliances and automation applications. The device has robust internal thermal protection, which protects itself from potential damage caused by conditions like short to ground, increases in ambient temperature, high load, or high dropout events.

The TLV760 is an integrated linear-voltage regulator featuring operation from an input as high as 30 V. The TLV760 has a maximum dropout of 1.2 V at the full 100-mA load across operating temperature. Standard packaging for the TLV760 is the 3-pin SOT-23 package.

The TLV760 is available in 3.3 V, 5 V, 12 V and 15 V. The SOT-23 packaging of the TLV760 series allows the device to be used in space-constrained applications. The TLV760 is a small size alternative to LM78Lxx series and similar devices.

The TLV760 is designed to bias digital and analog circuits in applications that are subject to voltage transients and spikes up to 30 V — for example, appliances and automation applications. The device has robust internal thermal protection, which protects itself from potential damage caused by conditions like short to ground, increases in ambient temperature, high load, or high dropout events.

filter Find other Linear & low-dropout (LDO) regulators
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Similar functionality to the compared device
TLV704 ACTIVE 150-mA 24-V ultra-low-IQ low-dropout (LDO) voltage regulator A low power (IQ = 3.4 µA), low dropout (400 mV), 150-mA LDO regulator
TLV767 ACTIVE Adjustable- and fixed-output, 1-A, 16-V, positive-voltage low-dropout (LDO) linear regulator A high-accuracy, 1-A LDO regulator with low IQ & foldback current limit
TPS709 ACTIVE 150-mA, 30-V, ultra-low-IQ, low-dropout voltage regulator with reverse current protection and enable An ultralow power (IQ = 1µA), wide input (30V), 150-mA LDO regulator

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TLV760 100-mA, 30-V, Fixed-Output, Linear-Voltage Regulator datasheet (Rev. A) PDF | HTML 03 Oct 2017
Application brief 16-Bit 8-Channel PLC Analog Input Module with High Voltage (±150 V) Common Mode 27 Apr 2020
Technical article How to choose the right kind of DC/DC conversion for your appliance design PDF | HTML 04 Dec 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ25672EVM — BQ25672 evaluation module for I²C controlled, 1-4-cell, 3-A buck charger with dual input and MPPT

The BQ25672EVM evaluation module (EVM) is used to evaluate the BQ25672 device. The BQ25672 is an integrated switched-mode buck battery charge management device in HOTROD (QFN) package, intended for 1-series to 4-series cell Li-ion and Li-polymer batteries from 6-V to 24-V input with programmable (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

BQ25790EVM — I2C 5-A, 1-4 cell buck-boost charger with dual-input and USB PD 3.0 OTG output evaluation module

The BQ25790EVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the BQ25790 device. The BQ25790 is an integrated switched-mode buck-boost battery charge management device intended for 1-series to 4-series cell li-ion and li-polymer batteries. The charger features a (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

BQ25792EVM — I2C controlled, 5-A, 1-4 cell buck-boost charger evaluation module with dual-input selector

The BQ25792 evaluation module (EVM) is used to evaluate the BQ25792 device. The BQ25792 is an integrated switched-mode buck-boost battery charge management device in HOTROD (QFN) package, intended for 1- to 4-series cell li-ion and li-polymer batteries from 3.6-V to 24-V input with programmable (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

BQ25798BKUPEVM — BQ25798 evaluation module I²C controlled 5-A, 1- to 4-cell buck-boost charger in QFN package

The BQ25798BKUPEVM evaluation module (EVM) is used to evaluate the BQ25798 device in back-up mode applications. The BQ25798 is an integrated switched-mode buck-boost battery charge management device in HOTROD (QFN) package, intended for 1- to 4-series cell Li-ion and Li-polymer batteries from 3.6-V (...)
User guide: PDF | HTML
Not available on TI.com
Evaluation board

BQ25798EVM — BQ25798 evaluation module I²C controlled, 1- to 4-cell, 5-A buck-boost charger, dual input and MPPT

The BQ25798EVM evaluation module (EVM) is used to evaluate the BQ25798 device. The BQ25798 is an integrated switched-mode buck-boost battery charge management device in HOTROD (QFN) package, intended for 1-series to 4-series cell Li-ion and Li-polymer batteries from 3.6-V to 24-V input with (...)
User guide: PDF | HTML
Not available on TI.com
Simulation model

TLV76033 PSpice Transient Model

SNVMBC9.ZIP (45 KB) - PSpice Model
Download
Simulation model

TLV76033 Unencrypted PSpice Transient Model

SNVMBD0.ZIP (2 KB) - PSpice Model
Download
Simulation model

TLV76050 PSpice Transient Model

SNVMBC7.ZIP (45 KB) - PSpice Model
Download
Simulation model

TLV76050 Unencrypted PSpice Transient Model

SNVMBC8.ZIP (2 KB) - PSpice Model
Download

Many TI reference designs include the TLV760

Use our reference design selection tool to review and identify designs that best match your application and parameters.

View reference designs
Package Pins CAD symbols, footprints & 3D models
SOT-23 (DBZ) 3 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos