TPS622314-Q1

Name: TPS622314-Q1
Brand: TI
SKU: TPS622314-Q1
Price: 0.515 USD

ACTIVE

Automotive 2V to 6V, 500mA Buck Converter with 1.5V Fixed Output Voltage in 1x1.5mm SON Package

Order now

Data sheet

document-pdfAcrobat TPS62231x-Q1 3-MHz Ultra-Small Step-Down Converter in 1 × 1.5 SON Package datasheet (Rev. A) PDF | HTML

A newer version of this product is available

open-in-new

Compare alternates

This product continues to be available for existing customers. New designs should consider an alternate product.

Same functionality with different pin-out to the compared device

TPS628501-Q1

ACTIVE

Automotive 2.7V-to-6V 1A step-down converter in SOT-583 package New generation with smaller solution size and higher efficiency

TPS622314-Q1

ACTIVE

Data sheet

Order now

Product details

Rating

Automotive

Operating temperature range (°C)

-40 to 105

Topology

Buck

Type

Converter

Iout (max) (A)

0.5

Vin (min) (V)

2.05

Vin (max) (V)

6

Switching frequency (min) (kHz)

3000

Switching frequency (max) (kHz)

3800

Features

Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

DCS-Control, Voltage mode

Vout (min) (V)

1.5

Vout (max) (V)

1.5

Iq (typ) (µA)

22

Duty cycle (max) (%)

100

Rating

Automotive

Operating temperature range (°C)

-40 to 105

Topology

Buck

Type

Converter

Iout (max) (A)

0.5

Vin (min) (V)

2.05

Vin (max) (V)

6

Switching frequency (min) (kHz)

3000

Switching frequency (max) (kHz)

3800

Features

Enable, Fixed Output, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

DCS-Control, Voltage mode

Vout (min) (V)

1.5

Vout (max) (V)

1.5

Iq (typ) (µA)

22

Duty cycle (max) (%)

100

USON (DRY)

6

1.45 mm² 1.45 x 1

Qualified for Automotive Applications
Up to 3.8-MHz Switch Frequency
Up to 94% Efficiency
Output Peak Current up to 500 mA
Excellent AC and Transient Load Regulation
High PSRR (up to 90 dB)
Small External Output-Filter Components 1 µH
and 4.7 µF
V_IN range from 2.05 V to 6 V
Optimized Power Save Mode For Low Output-
Ripple Voltage
Forced PWM Mode Operation
Typical 22-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Small 1 × 1.5 × 0.6-mm³ SON Package
12-mm² Minimum Solution Size
Supports 0.6-mm Maximum Solution Height
Soft Start With 100-µs (Typical) Start-Up Time

Qualified for Automotive Applications
Up to 3.8-MHz Switch Frequency
Up to 94% Efficiency
Output Peak Current up to 500 mA
Excellent AC and Transient Load Regulation
High PSRR (up to 90 dB)
Small External Output-Filter Components 1 µH
and 4.7 µF
V_IN range from 2.05 V to 6 V
Optimized Power Save Mode For Low Output-
Ripple Voltage
Forced PWM Mode Operation
Typical 22-µA Quiescent Current
100% Duty Cycle for Lowest Dropout
Small 1 × 1.5 × 0.6-mm³ SON Package
12-mm² Minimum Solution Size
Supports 0.6-mm Maximum Solution Height
Soft Start With 100-µs (Typical) Start-Up Time

The TPS6223x-Q1 device family is a high-frequency, synchronous step-down DC-DC converter ideal for space-optimized automotive and industrial applications. The device supports up to 500-mA output current and allows the use of tiny and low-cost chip inductors and capacitors.

With a wide input-voltage range of 2.05 V to 6 V, the device can be powered by a preregulated voltage rail or Li-Ion batteries with extended voltage range. Two different fixed-output voltage versions are available at 1.5 V and 1.8 V.

The TPS6223x-Q1 series features switch frequency up to 3.8 MHz. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range.

Because of its excellent PSRR and AC load regulation performance, the device is also suitable to replace linear regulators to obtain better power conversion efficiency.

The Power Save Mode in TPS6223x-Q1 reduces the quiescent current consumption down to 22 µA during light load operation. It is optimized to achieve very low output voltage ripple even with small external component and features excellent AC load regulation.

For noise-sensitive applications, the device can be forced to PWM Mode operation over the entire load range by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6223x-Q1 is available in a 1-mm × 1.5-mm² 6-pin SON package.

The TPS6223x-Q1 device family is a high-frequency, synchronous step-down DC-DC converter ideal for space-optimized automotive and industrial applications. The device supports up to 500-mA output current and allows the use of tiny and low-cost chip inductors and capacitors.

With a wide input-voltage range of 2.05 V to 6 V, the device can be powered by a preregulated voltage rail or Li-Ion batteries with extended voltage range. Two different fixed-output voltage versions are available at 1.5 V and 1.8 V.

The TPS6223x-Q1 series features switch frequency up to 3.8 MHz. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range.

Because of its excellent PSRR and AC load regulation performance, the device is also suitable to replace linear regulators to obtain better power conversion efficiency.

The Power Save Mode in TPS6223x-Q1 reduces the quiescent current consumption down to 22 µA during light load operation. It is optimized to achieve very low output voltage ripple even with small external component and features excellent AC load regulation.

For noise-sensitive applications, the device can be forced to PWM Mode operation over the entire load range by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6223x-Q1 is available in a 1-mm × 1.5-mm² 6-pin SON package.

filter

Find other AC/DC & DC/DC converters (integrated FET)

Download View video with transcript Video

Similar products you might be interested in

open-in-new

Compare alternates

Same functionality with different pin-out to the compared device

TPS62811-Q1

ACTIVE

Automotive 2.75-V to 6-V, 1-A step-down converter in a 2mm x 3mm wettable-flanks QFN package New generation with smaller solution size and higher efficiency

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 10

	Type	Title		Date
*	Data sheet	TPS62231x-Q1 3-MHz Ultra-Small Step-Down Converter in 1 × 1.5 SON Package datasheet (Rev. A)	PDF \| HTML	07 Mar 2016
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 Dec 2023
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 Dec 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22 Jun 2018
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24 Oct 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24 Oct 2016
	Analog Design Journal	Understanding frequency variation in the DCS-Control(TM) topology		30 Oct 2015
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		17 Aug 2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29 Jan 2015
	Analog Design Journal	High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions		25 Jul 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS622312EVM-574 — Evaluation Module for TPS622312, TPS622313, TPS622314 Ultra Small Step Down Converter (1.3, 1.5, 2)V

The Texas Instruments TPS622312EVM-574 evaluation module helps designers evaluate the operation and performance of the TPS6223x family of devices. These devices are high-efficiency, ultra-small size, buck converters that switch at up to 3 MHz. This user's guide includes setup instructions, a (...)

User guide: PDF