Home Power management Linear & low-dropout (LDO) regulators
Home
Power management
Linear & low-dropout (LDO) regulators

TPS7B4253-Q1

ACTIVE

Automotive 300-mA, off-battery (40-V), adjustable voltage-tracking low-dropout voltage regulator

Order now
Data sheet

TPS7B4253-Q1

ACTIVE
Data sheet Order now

Product details

Output options Tracking Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 40 Vout (min) (V) 1.5 Iq (typ) (mA) 0.04 Thermal resistance θJA (°C/W) 45 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Reverse Current Protection, Reverse voltage protection, Short-to-battery protection PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 350 Operating temperature range (°C) -40 to 125
Output options Tracking Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 40 Vout (min) (V) 1.5 Iq (typ) (mA) 0.04 Thermal resistance θJA (°C/W) 45 TI functional safety category Functional Safety-Capable Rating Automotive Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Reverse Current Protection, Reverse voltage protection, Short-to-battery protection PSRR at 100 KHz (dB) 60 Dropout voltage (Vdo) (typ) (mV) 350 Operating temperature range (°C) -40 to 125
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 HTSSOP (PWP) 20 41.6 mm² 6.5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C6
  • –40 to 45-V Wide Input-Voltage Range (Maximum)
  • Output Voltage Adjusts Down to:
    • 1.5 to 40 V (HTSSOP)
    • 2 to 40 V (SO PowerPAD™)
  • 300-mA Output Current Capability
  • Very-Low Output Tracking Tolerance, ±4 mV
  • 320-mV Low Dropout Voltage when IOUT = 200 mA
  • Separate Pins for Enable and Tracking Inputs (HTSSOP only)
  • Low Quiescent Current (IQ):
    • < 4 µA when EN = LOW
    • 60 µA (Typical) at Light Loads
  • Extremely Wide ESR Range.
    • Stable With 10- to 500-µF Ceramic Output Capacitor, ESR 1 mΩ to 20 Ω
  • Reverse Polarity Protection
  • Current-Limit and Thermal-Shutdown Protection
  • Output Short-Circuit Proof to Ground and Supply
  • Inductive Clamp at OUT Pin
  • Available in the Following Packages:
    • 8-Pin SO PowerPAD Package
    • 20-Pin HTSSOP Package
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C6
  • –40 to 45-V Wide Input-Voltage Range (Maximum)
  • Output Voltage Adjusts Down to:
    • 1.5 to 40 V (HTSSOP)
    • 2 to 40 V (SO PowerPAD™)
  • 300-mA Output Current Capability
  • Very-Low Output Tracking Tolerance, ±4 mV
  • 320-mV Low Dropout Voltage when IOUT = 200 mA
  • Separate Pins for Enable and Tracking Inputs (HTSSOP only)
  • Low Quiescent Current (IQ):
    • < 4 µA when EN = LOW
    • 60 µA (Typical) at Light Loads
  • Extremely Wide ESR Range.
    • Stable With 10- to 500-µF Ceramic Output Capacitor, ESR 1 mΩ to 20 Ω
  • Reverse Polarity Protection
  • Current-Limit and Thermal-Shutdown Protection
  • Output Short-Circuit Proof to Ground and Supply
  • Inductive Clamp at OUT Pin
  • Available in the Following Packages:
    • 8-Pin SO PowerPAD Package
    • 20-Pin HTSSOP Package

For automotive off-board sensors and small current off-board modules, the power supply is through a long cable from the main board. In such cases, protection is required in the power devices for the off-board loads to prevent the onboard components from damage during a short to GND or short to battery caused by a broken cable. Off-board sensors require consistent power supply as onboard components to secure high accuracy of data acquisition.

The TPS7B4253-Q1 device is designed for automotive applications with a 45-V load dump. The device can either be used as one tracking low-dropout (LDO) regulator or voltage tracker to build one closed power loop for off-board sensors with an onboard main supply. The output of the device is accurately regulated by a reference voltage at the ADJ pin.

To provide an accurate power supply to the off-board modules, the device offers a 4-mV ultralow tracking tolerance between the ADJ and FB pins across temperature. The back-to-back PMOS topology eliminates the need for an external diode under reverse polarity condition. The TPS7B4253-Q1 device also includes thermal shutdown, inductive clamp, overload, and short-to-battery protection to prevent damage to onboard components during extreme conditions.

For automotive off-board sensors and small current off-board modules, the power supply is through a long cable from the main board. In such cases, protection is required in the power devices for the off-board loads to prevent the onboard components from damage during a short to GND or short to battery caused by a broken cable. Off-board sensors require consistent power supply as onboard components to secure high accuracy of data acquisition.

The TPS7B4253-Q1 device is designed for automotive applications with a 45-V load dump. The device can either be used as one tracking low-dropout (LDO) regulator or voltage tracker to build one closed power loop for off-board sensors with an onboard main supply. The output of the device is accurately regulated by a reference voltage at the ADJ pin.

To provide an accurate power supply to the off-board modules, the device offers a 4-mV ultralow tracking tolerance between the ADJ and FB pins across temperature. The back-to-back PMOS topology eliminates the need for an external diode under reverse polarity condition. The TPS7B4253-Q1 device also includes thermal shutdown, inductive clamp, overload, and short-to-battery protection to prevent damage to onboard components during extreme conditions.
filter Find other Linear & low-dropout (LDO) regulators
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
TPS7B4254-Q1 ACTIVE Automotive 150-mA, off-battery (40-V), adjustable voltage-tracking low-dropout voltage regulator Lower current

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TPS7B4253-Q1 300-mA 40-V Low-Dropout Voltage-Tracking LDO With 4-mV Tracking Tolerance datasheet (Rev. C) PDF | HTML 22 Jul 2016
Functional safety information TPS7B4253-Q1 Functional Safety FIT Rate and Failure Mode Distribution 17 Dec 2019
Application brief Automotive Off-Board Sensor Power Considerations 20 Sep 2018
More literature Fundamentals of designing with LDOs in auto battery direct connect applications 27 Feb 2017
Application note Using Tracking LDOs as High-Side Switch (for Low-Current Applications) 28 Oct 2016
EVM User's guide LDO Parallel Design Evaluation Module User's Guide 14 Sep 2016
Application note Various Applications for Voltage-Tracking LDO 03 Aug 2016
Application note TPS7B4253-Q1 Pin FMEA 21 Dec 2015
User guide TPS7B4253-Q1 Evaluation Module 11 Dec 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LDO-PARAL-DESG-EVM — LDO Parallel Solution Evaluation Board with TPS7B4253-Q1

This LDO Parallel Solution evaluation modules (EVM) help designers evaluate the operation and performance of TPS7B4253-Q1 and TPS7B6750-Q1 parallel application. This EVM uses a very low-tolerance, voltagetracking LDO TPS7B4253-Q1 to demonstrate the
implementation of LDO parallel solution for high (...)
User guide: PDF
Not available on TI.com
Evaluation board

TPS7B4253EVM — TPS7B4253-Q1 tracking LDO regulator evaluation module

 

TPS7B4253 evaluation modules (EVM) help designers evaluate the operation and performance of TPS7B4253QPWPRQ1 tracking LDO. The TPS7B4253 is a monolithic integrated low dropout voltage tracker in HSOIC-DDA package. It is designed to supply off-board sensors in automotive environment. The IC has (...)
User guide: PDF
Not available on TI.com
Simulation model

TPS7B4253 PSpice Transient Model (Rev. C)

SLVMB36C.ZIP (89 KB) - PSpice Model
Download
Simulation model

TPS7B4253 TINA-TI Reference Design

SLVMC49.TSC (163 KB) - TINA-TI Reference Design
Download
Simulation model

TPS7B4253 TINA-TI Transient Spice Model

SLVMC48.ZIP (20 KB) - TINA-TI Spice Model
Download
Simulation model

TPS7B4253 Unencrypted PSpice Transient Model

SLVMC85.ZIP (3 KB) - PSpice Model
Download
Reference designs

TIDA-00745 — 15-W System-Level Power Reference Design for Automotive Body Control Module

TIDA-00745 is a 14-W system-optimized (CISPR25 Class 4) SMPS design for an automotive body control module. All buck converters used in this design are switching at 2.1 MHz. 

The design is divided into four major blocks:

  1. EMI filter: Common mode and a differential filter for conducted EMI suppression
  2. (...)
Design guide: PDF
Schematic: PDF
Reference designs

TIDA-00863 — LDO Parallel Solution Reference Design with TPS7B4253-Q1

This reference design uses a very-low tolerant, voltage-tracking LDO TPS7B4253-Q1 to demonstrate the implementation of LDO parallel for high-output current and low-IQ requirements.
Design guide: PDF
Schematic: PDF
Package Pins CAD symbols, footprints & 3D models
HSOIC (DDA) 8 Ultra Librarian
HTSSOP (PWP) 20 Ultra Librarian
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos