LPC662
Rail-to-rail output swing | |
Micropower operation (<0.5 mW) | |
Specified for 100 k and 5 k loads | |
High voltage gain | 120 dB |
Low input offset voltage | 3 mV |
Low offset voltage drift | 1.3 µV/°C |
Ultra low input bias current | 2 fA |
Input common-mode includes GND | |
Operating range from +5V to +15V | |
Low distortion | 0.01% at 1 kHz |
Slew rate | 0.11 V/µs |
Full military temperature range available |
The LPC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltage from +5V to +15V, rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 k and 5 k) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 0.5 mW.
This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process.
See the LPC660 datasheet for a Quad CMOS operational amplifier and LPC661 for a single CMOS operational amplifier with these same features.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | LPC662 Low Power CMOS Dual Operational Amplifier 数据表 (Rev. B) | 2004年 5月 1日 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点