Support software
CIRCUIT060011
Single-supply, second-order, multiple feedback high-pass filter circuit
CIRCUIT060011
Overview
The multiple-feedback (MFB) high-pass (HP) filter is a 2nd-order active filter. Vref provides a DC offset to accommodate for single-supply applications. This HP filter inverts the signal (Gain = –1 V/V) for frequencies in the pass band. An MFB filter is preferable when the gain is high or when the Q-factor is large (for example, 3 or greater)
Features
- Single 5-V supply
- Input: +/-2.45 V
- Output: 50 mV to 4.95 V
- Cutoff frequency: 1 kHz
- Gain: -1 V/V
Get started
- Read the circuit design
- Download the model
Downloads
Supported products & hardware
General-purpose op amps
Precision op amps (Vos<1mV)
Technical documentation
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 6
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Circuit design | Single-supply, 2nd-order, multiple feedback high-pass filter circuit | PDF | HTML | 28 Jun 2021 |
| E-book | Analog Engineer’s Circuit Cookbook: Amplifiers (Rev. C) | 18 Dec 2023 | ||
| Application note | Active Low-Pass Filter Design (Rev. D) | PDF | HTML | 02 Feb 2023 | |
| Application note | Compensation Methodology for Error in MFB Low-Pass Filter, Caused by Limited GBW | 04 Aug 2017 | ||
| Application note | Design Methodology for MFB Filters in ADC Interface Applications | 23 Feb 2005 | ||
| Application note | More Filter Design on a Budget | 06 Dec 2001 |
Related design resources
Design tools & simulation
SIMULATION TOOL
CALCULATION TOOL
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.