Home
Design & development

CONGA-3P-STDA4

congatec STDA4 SMARC system on module for TDA4VM SoC with dual Arm Cortex-A72 C7x DSP, GPU

Order now

CONGA-3P-STDA4

From: congatec GmbH
Order now

Overview

Congatec's STDA4 SMARC module is based on TDA4VM application processor and DRA829J networking processor.
The module is designed to take advantage of the heterogenous SoC architecture with dual Arm® Cortex®-A72, DSP and accelerators for deep learning (NPU) and multimedia (GPU), Arm® Cortex®-R5F MCUs to offload real-time communication and safety functions. The module is designed for high reliability in harsh environment applications and an industrial temperature range from -40°C to +85°C. 

The different product variants allow for populating the conga-STDA4 module with either the TDA4VM or DRA829J device, along with scalable memory sizes for both LPDDR4 RAM and eMMC 5.1 NAND Flash memory. An optional WiFi and Blutetooth module can be populated on the module with SMA connectors for antennas.

The conga-STDA4 SMARC module is compatible with the conga-SEVAL evaluation carrier board and conga-SMC1/SMARC-ARM compact-sized carrier board for evaluating performance and developing software.

Features
  • 82 mm x 50 mm    
  • SMARC    
  • Up to 8-GB LPDDR4, up to 128-GB eMMC 5.1    
  • 2x Gb Ethernet (1 on-board), 2x MIPI-CSI 4L, up to 4 PCIe 3.0 channels (x1 or x2)    
  • Optional WiFi/Bluetooth module on-board    
  • Display Port 1.4 supports up to 3 Full-HD 1080p displays, LVDS, optional MIPI-DSI 4-lane shared with LVDS    
  • Linux Yocto, Free RTOS, QNX, Ubuntu, Docker    
Arm-based processors
DRA829J — Dual Arm Cortex-A72, quad Cortex-R5F, multi-core DSP, 8-port Ethernet switch, and 4-port PCIe switch TDA4VM — Dual Arm® Cortex®-A72 SoC and C7x DSP with deep-learning, vision and multimedia accelerators

 

Ethernet PHYs
DP83867IS — Industrial temperature, robust gigabit Ethernet PHY transceiver with SGMII

 

Multi-channel ICs (PMICs)
LP8764-Q1 — 4 5-A/20-A multiphase buck converters PMIC for automotive SoCs TPS6594-Q1 — Automotive 2.8-V to 5.5-V PMIC with five buck regulators and four low-dropout regulators
Download View video with transcript Video
Photos courtesy of congatec GmbH

Order & start development

Development kit

CONGA-SMC1-SMARC-ARM — Compact sized carrier board for ARM-based SMARC 2.0 modules, compatible with conga-STDA4

Visit partner site
Development kit

CONGA-SEVAL — Evaluation carrier board compatible with conga-STDA4 SMARC modules

Visit partner site
Evaluation board

CONGA-STDA4-DRA829J — STDA4 SMARC system on module populated with DRA829J networking processor

Visit partner site
Evaluation board

CONGA-STDA4-TDA4VM — STDA4 SMARC system on module populated with TDA4VM application processor

Visit partner site
TI's Standard Terms and Conditions for Evaluation Items apply.

Support & training

Third-party support
TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact congatec GmbH.

Videos
Disclaimer

Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.