Home
Design & development

DRV2511Q1EVM

DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module

Order now

DRV2511Q1EVM

Order now

Overview

The DRV52511-Q1 evaluation module (EVM) allows a designer to driver to assess the device alone or connected to target actuators such as a solenoid to easily and quickly evaluate performance of the driver or the actuator in use conditions.

Features
  • High output current capable of 8A peak
  • Integrated fault protect modes
  • Analog input
  • Wide operating voltage range of 4.5 V – 18V
Haptic motor drivers
DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection

 

General-purpose op amps
LM358A — Dual, 30-V, 700-kHz, 3-mV offset voltage operational amplifier

 

Linear & low-dropout (LDO) regulators
TL760M33-Q1 — Automotive 500-mA, 26-V, high-accuracy, low-dropout voltage regulator

 

MSP430 microcontrollers
MSP430F5510 — 25 MHz MCU with 32KB Flash, 4KB SRAM, 10-bit ADC, comparator, DMA, UART/SPI/I2C, USB, HW multiplier
Download View video with transcript Video

Order & start development

Evaluation board

DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module

Log in to order
lock Log in to view inventory
In stock / Out of stock
Limit:
Not available on TI.com
GUI for evaluation module (EVM)

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

Supported products & hardware
Download

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

close
Latest version
Version: 01.00.00.0D
Release date: 28 Jul 2020
open-in-new View all versions
lock Haptic Control Console v1.6.0.2 (zip)  — 5610 K

Checksum
lock = Requires export approval (1 minute)
Products
Piezo drivers
DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC
Haptic motor drivers
DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption
Hardware development
Evaluation board
DRV-ACC16-EVM — Haptic accelerometer measurement tool DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics DRV2667EVM-CT — EVM for Piezo Haptic Driver with Boost, Digital Front End, and Internal Waveform Memory LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc332 or www.ti.com/lit/xx/sloc332d/sloc332d.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC332. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* EVM User's guide DRV2511Q1EVM Haptic Solenoid Driver Evaluation Kit 29 Apr 2016
User guide Haptic Control Console GUI (Rev. B) 14 Oct 2021
Certificate DRV2511Q1EVM EU Declaration of Conformity (DoC) 02 Jan 2019

Related design resources

Software development

APPLICATION SOFTWARE & FRAMEWORK
HAPTICS-CONSOLE — Haptics Control Console Software

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos