DRV2605EVM-CT

DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

DRV2605EVM-CT

Overview

The DRV2605 is a haptic driver designed for Linear Resonant Actuators (LRA) and Eccentric Rotating Mass (ERM) motors. It provides many features which help eliminate the design complexities of haptic motor control including reduced solution size, high efficiency output drive, closed-loop motor control, quick device startup, and auto-resonance frequency tracking.

The DRV2605EVM-CT Evaluation Module (EVM) is a complete demo and evaluation platform for the DRV2605. The kit includes a microcontroller, linear actuator, eccentric rotating mass motor, sample waveforms and capacitive touch buttons which can be used to completely demonstrate and evaluate the DRV2605.

Features

Smart Loop Architecture

Automatic Overdrive & Braking (ERM/LRA)

Automatic Resonance Tracking (LRA)

Automatic Actuator Diagnostics (ERM/LRA)

Automatic Calibration (ERM/LRA)

I2C Digital Playback Engine

123 Effect Haptic Waveform Library

Audio-to-Haptics

ERM & LRA Actuator

Capacitive Touch Buttons

Programmable MSP430

Haptic motor drivers

DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking

MSP430 microcontrollers

MSP430TCH5E — 16 MHz MCU with 16KB Flash, 512B SRAM, haptics-enabled, capacitive touch, 10-bit ADC, UART/SPI/I2

Download View video with transcript Video

Order & start development

Explore packages of hardware, software and documentation

Develop with DRV2605

See hardware, software, and design resources for evaluating the DRV2605 Haptic driver for ERM/LRA.

Evaluation board

DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

Required

Why do I need this?

This complete reference design for the DRV2605/L ERM and LRA haptics driver has Smart Loop Algorithm, RAM for waveform storage, and adds extended actuator support for ERMs and LRAs.

Not available on TI.com

Evaluation board

DRV-ACC16-EVM — Haptic Accelerometer Measurement Tool

Optional

Why do I need this?

This Haptic Accelerometer Measurement Tool is highly recommended for you to easily measure and characterize haptic feedback, acceleration and vibration strength.

Not available on TI.com

Evaluation board

USB2ANY — USB2ANY interface adapter

Required if

Using EVM module.

Why do I need this?

The USB2ANY interface adapter is a tool intended to allow a computer to control an evaluation module (EVM) via a USB connection.

Not available on TI.com

Firmware

SLOC318 — DRV2605EVM-CT Firmware v1.0

Optional

Why do I need this?

This is the DRV2605EVM-CT firmware.

Supported products & hardware

Download

SLOC318 — DRV2605EVM-CT Firmware v1.0

Latest version

Version: 01.00.00.0A

Release date: 22 Jan 2018

open-in-new

View all versions

lock

DRV2605EVM-CT Firmware v1.0 (zip) — 295 K

Checksum

lock

= Requires export approval (1 minute)

Products

Haptic motor drivers

DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking

Hardware development

Evaluation board

DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc318 or www.ti.com/lit/xx/sloc318a/sloc318a.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC318. Please update any bookmarks accordingly.

GUI for evaluation module (EVM)

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

Required

Why do I need this?

This Haptic Control Console is an evaluation and development suite for TI Haptic Drivers to help you setup, control and evaluate the entire device.

Supported products & hardware

Download

HAPTICS-CONSOLE — Haptic Control Console v1.6.0.2

Latest version

Version: 01.00.00.0D

Release date: 28 Jul 2020

open-in-new

View all versions

lock

Haptic Control Console v1.6.0.2 (zip) — 5610 K

Checksum

lock

= Requires export approval (1 minute)

Products

Piezo drivers

DRV2667 — Haptic driver for piezo with integrated 105-V boost converter, waveform memory & DAC

Haptic motor drivers

DRV2510-Q1 — Automotive 3A haptic driver for solenoids with integrated diagnostics and load-dump protection

DRV2511-Q1 — Automotive 8A haptic driver for solenoids with integrated fault-protection

DRV2604 — Haptic driver for ERM/LRA with waveform memory & auto-resonance tracking

DRV2604L — Haptic driver for ERM/LRA with 2-V operation, waveform memory & auto-resonance tracking

DRV2605 — Haptic driver for ERM/LRA with waveform library & auto-resonance tracking

DRV2605L — Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking

DRV2624 — Haptic driver for ERM/LRA with waveform memory, auto-resonance tracking, & low power consumption

DRV2625 — Haptic driver for ERM/LRA with waveform library, auto-resonance tracking, & low power consumption

Hardware development

Evaluation board

DRV-ACC16-EVM — Haptic accelerometer measurement tool

DRV2510Q1EVM — DRV2510-Q1 Automotive Haptic Driver for Solenoids with Integrated Diagnostics Evaluation Module

DRV2511Q1EVM — DRV2511-Q1 Automotive Haptic Driver for Solenoids Evaluation Module

DRV2604EVM-CT — DRV2604EVM-CT eval for Haptic Driver for ERM/LRA with Waveform Memory and Smart Loop Architecture

DRV2604LDGSEVM-M — DRV2604L Haptics Smart Loop Algorithm and Integrated RAM for Customized Waveform Breakout Board

DRV2604LEVM-CT — DRV2604L ERM and LRA Haptics Evaluation Kit

DRV2605EVM-CT — DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation

DRV2605LDGSEVM-M — DRV2605L Breakout Board with Haptics Smart Loop Algorithm and TouchSense 2200™ Effects Library

DRV2605LEVM-CT — DRV2605L ERM and LRA Haptics Evaluation Kit

DRV2605LEVM-MD — DRV2605L Multi-Driver Board for ERM and LRA Haptic Feedback

DRV2624EVM-CT — DRV2624 evaluation board with capacitive touch

DRV2624EVM-MINI — DRV2624 Breakout Board for ERM / LRA Haptics

DRV2625EVM-CT — DRV2625 Evaluation Board with Bluetooth and Capacitive Touch

DRV2625EVM-MINI — DRV2625 Breakout Board for ERM / LRA Haptics

DRV2667EVM-CT — EVM for Piezo Haptic Driver with Boost, Digital Front End, and Internal Waveform Memory

LM48560TLEVAL — High Voltage Class H Ceramic Speaker Driver with Automatic Level Control

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sloc332 or www.ti.com/lit/xx/sloc332d/sloc332d.zip has been migrated to a new user experience at www.ti.com/tool/download/SLOC332. Please update any bookmarks accordingly.

Firmware

SLOC340 — DRV-USB-COM Board Firmware

Optional

Why do I need this?

This is the DRV-USB-COM board firmware.

Supported products & hardware

Download

SLOC340 — DRV-USB-COM Board Firmware

Latest version

Version: 01.00.00.00

Release date: 17 Aug 2016

open-in-new

View all versions

download

DRV-USB-COM Board Firmware (zip) — 591 K