The DRV8873 is an integrated driver for industrial and automotive applications. With 10 A peak current capability and 4.5-38V voltage range, this device supports a wide range of applications.
PH/EN or PWM interface allows simple interfacing to controller circuits while also allowing independent ½ bridge control to drive two solenoid loads. A current mirror approximates the current through the high-side FETs, and does not require a sense resistor. A low-power sleep mode is provided to achieve very low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage lockout, charge pump faults, overcurrent protection, short circuit protection, and overtemperature with fault conditions indicated on an nFAULT pin and through the SPI registers.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | User guide | DRV8873x-Q1EVM User’s Guide (Rev. B) | 10 Dec 2018 | |
| Certificate | DRV8873H-Q1EVM EU Declaration of Conformity (DoC) | 02 Jan 2019 | ||
| User guide | DRV8873x-Q1EVM GUI User's Guide (Rev. B) | 10 Dec 2018 |
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.