Home
Design & development

HDC1080EVM

HDC1080 low-power humidity and temperature sensor evaluation module

Order now

HDC1080EVM

Order now

Overview

The HDC1080EVM evaluation kit is a plug and play system to test and evaluate the HDC1080 humidity and temperature sensor. The EVM utilizes a USB interface for control and data streaming, and can be to plugged into a PC USB port. With the simple GUI, humidity and temperature measurements can be streaming within a matter of seconds after the EVM is attached to a PC and the GUI is started. The EVM hosts a MSP430F5528 microcontroller which acts as a bridge between the PC USB interface and the I2C interface to the HDC1080. The sensor section of the PCB may be separated from the main PCB to support prototyping in a system where the sensor is remotely located from the host controller. The HDC1080EVM does not require calibration,  nor does it require any software programming - only the Sensing Solution EVM GUI must be installed. The GUI displays realtime streaming of both humidity and temperature measurements, and allows access to the HDC1080's configuration registers. Temperature and relative humidity data can be logged and exported in CSV format.

Features
  • Streaming relative humidity and temperature measurements
  • Data logging
  • Full register access
  • USB plug & play
  • Detachable sensor section for prototyping remote operation

  • HDC1080EVM
Humidity sensors
HDC1080 — 2% RH low-power digital relative humidity sensor
Download View video with transcript Video

Get started

  1. Order HDC1080EVM
  2. Consult HDC1080EVM User's Guide
  3. Download Sensing Solutions EVM GUI Tool and Install
  4. Utilize E2E for resolving any issues, using HDC1080EVM as part number

Order & start development

Evaluation board

HDC1080EVM —

HDC1080 low-power humidity and temperature sensor evaluation module

Log in to order
lock Log in to view inventory
In stock / Out of stock
Limit:
Not available on TI.com
GUI for evaluation module (EVM)

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

Supported products & hardware
Download

SNOC028 — Sensing Solutions EVM GUI Tool v1.10.0

close
Latest version
Version: 01.00.00.0F
Release date: 24 Feb 2019
open-in-new View all versions
lock Sensing Solutions EVM GUI Tool v1.10.0 (zip)  — 61513 K

Checksum
lock = Requires export approval (1 minute)
Products
Humidity sensors
HDC1000 — Low Power, 3% Accuracy Digital Humidity Sensor with Integrated Temperature Sensor HDC1050 — ±3% low-power, digital humidity sensor with temperature sensor HDC2010 — 2% RH ultra-small, low-power digital relative humidity sensor HDC2080 — 2% RH ultra-low-power digital relative humidity sensor, interrupt/DRDY
Inductive sensor AFEs
LDC1001-Q1 — Automotive, 5V, grade-0, Inductance to Digital Converter LDC1041 — 1-Ch, 5V, 24-bit L, 8-bit Rp, inductance to digital converter LDC1051 — 1-Ch, 5V, 8-bit Rp, inductance to digital converter LDC1101 — 1-Ch, 1.8V, 24-bit L, 16-bit Rp, inductance to digital converter for high speed applications LDC1312 — 2-Ch, 12-bit, general purpose inductance to digital converter LDC1312-Q1 — 2-Ch, 12-bit, general purpose automotive inductance to digital converter LDC1314 — 4-Ch, 12-bit, general purpose inductance to digital converter LDC1314-Q1 — 4-Ch, 12-bit, general purpose automotive inductance to digital converter LDC1612 — 2-Ch, 28-bit, high-resolution Inductance to digital converter LDC1612-Q1 — 2-Ch, 28-bit, high-resolution automotive inductance to digital converter LDC1614 — 4-Ch, 28-bit, high-resolution Inductance to digital converter LDC1614-Q1 — 4-Ch, 28-bit, high-resolution automotive inductance to digital converter LDC2112 — 2-Ch inductance to digital converter with baseline tracking for low power touch buttons LDC2114 — 4-Ch inductance to digital converter with baseline tracking for low power touch buttons
Signal conditioners
FDC1004 — 4-channel 16-bit capacitance-to-digital converter with active shield driver for EMC protection FDC1004-Q1 — Automotive, 4-channel 16-bit capacitance-to-digital converter with active shield driver for EMC FDC2112 — 2-Ch, 12-bit, capacitance to digital converter FDC2112-Q1 — 2-Ch, 12-bit, automotive capacitance to digital converter FDC2114 — 4-Ch, 12-bit, capacitance to digital converter FDC2114-Q1 — 4-Ch, 12-bit, automotive capacitance to digital converter FDC2212 — 2-Ch, 28-bit, capacitance to digital converter FDC2212-Q1 — 2-Ch, 28-bit, automotive capacitance to digital converter FDC2214 — 4-Ch, 28-bit, capacitance to digital converter FDC2214-Q1 — 4-Ch, 28-bit, automotive capacitance to digital converter
Hardware development
Evaluation board
FDC1004EVM — FDC1004EVM - 4 Channel Capacitive to Digital Converter Evaluation Module FDC1004QEVM — Automotive 4-Channel Capacitive to Digital Converter Evaluation Module FDC2114EVM — FDC2114 with Two Capacitive Sensors Evaluation Module FDC2214EVM — FDC2214 with Two Capacitive Sensors Evaluation Module HDC1010EVM — HDC1010 Low Power Humidity and Temperature Sensor Evaluation Module HDC1080EVM — HDC1080 low-power humidity and temperature sensor evaluation module HDC2010EVM — HDC2010 Low Power Humidity and Temperature Sensor Evaluation Module HDC2080EVM — HDC2080 Low Power Humidity and Temperature Sensor Evaluation Module LDC1000EVM — LDC1000EVM - Evaluation Module for Inductance to Digital Converter with Sample PCB Coil LDC1312EVM — LDC1312 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils LDC1314EVM — LDC1314 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils LDC1612EVM — LDC1612 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils LDC1614EVM — LDC1614 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils LDC2114EVM — LDC2114 1.8V 4-Channel Inductive Touch Evaluation Module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/snoc028 or www.ti.com/lit/xx/snoc028f/snoc028f.zip has been migrated to a new user experience at www.ti.com/tool/download/SNOC028. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* EVM User's guide HDC1080EVM User's Guide (Rev. A) 21 Aug 2017
Certificate HDC1080EVM EC Declaration of Conformity (DoC) (Rev. A) 02 Jan 2019
Application note Humidity Sensor: Storage and Handling Guidelines 28 Aug 2017
Application note Optimizing Placement and Routing for Humidity Sensors (Rev. A) 06 Mar 2017

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos