INA228_237_238EVM

INA228, INA237 & INA238 evaluation module

INA228_237_238EVM

Order now

Overview

This evaluation module (EVM) is an easy-to-use platform to evaluate the main features and performance of the INA228, INA237 or INA238.

The EVM supports current measurements up to 10-A and comes with graphical user interface (GUI) support to read and write to device registers.

Features
  • GUI support to read and write device registers, and view and save results data
  • EVM detached from the sensor control board (SCB) for custom use cases
  • Multiple EVM support with a single SCB and GUI
  • Conveniently powered from a common micro-USB connector through the SCB
Digital power monitors
INA228 85-V, 20-bit, ultra-precise, I2C output current/voltage/power/energy/charge monitor with alert INA228-Q1 AEC-Q100, 85-V, 20-bit, ultraprecise, I²C output current/voltage/power/energy/charge monitor INA237 85-V, 16-bit, I2C output current/voltage/power monitor with alert INA237-Q1 AEC-Q100, 85-V, 16-bit, I²C output current/voltage/charge monitor INA238 85-V, 16-bit, high-precision I2C output current/voltage/power monitor with alert INA238-Q1 AEC-Q100, 85-V, 16-bit, high-precision, I²C output current/voltage/charge monitor
Download View video with transcript Video

Get started

  1. Buy the INA228, INA237 or INA238 evaluation board.
  2. Buy the TI-SCB sensor control board.
  3. Download and install the PAMB Windows USB Drivers.
  4. Read the INA228, INA229, INA237, INA238, and INA239 EVM user's guide to set up the hardware.
  5. Run the INA228_229_237_238_239EVM-GUI.

Order & start development

Evaluation board

INA228EVM

INA228, INA237 & INA238 evaluation module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Evaluation board

INA237EVM

INA228, INA237 & INA238 evaluation module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Evaluation board

INA238EVM

INA228, INA237 & INA238 evaluation module

Log in to order
In stock / Out of stock
Limit:
Not available on TI.com
Firmware

INA228_229_237_238_239EVM-GUI — INA228, INA229, INA237, INA238, INA239 EVM GUI - evaluate with live online version or download (Safari, Chrome or Firefox)

Support software

SBAC253 — PAMB Windows USB Drivers

Supported products & hardware
Download

SBAC253 PAMB Windows USB Drivers

close
Latest version
Version: 01.00.00.0A
Release date: 08 Mar 2020
lock PAMB Windows USB Drivers (zip)  — 13782 K

Checksum
lock = Requires export approval (1 minute)
Hardware development
Evaluation board
INA220EVM INA220 evaluation module for 26-V, 12-bit, I²C output digital power monitor INA226EVM INA226 Evaluation Module INA228_237_238EVM INA228, INA237 & INA238 evaluation module INA229_239EVM INA229 & INA239 evaluation module INA230EVM INA230 evaluation module for 36-V, 16-bit, I²C output digital power monitor with alert INA234_236EVM INA232, INA234 and INA236 evaluation module for current/voltage/power monitors INA700EVM INA700 evaluation module for EZShunt™ Digital Power Monitor with built in shunt resistor INA740-INA741EVM INA740 and INA741 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA745-INA746EVM INA745 and INA746 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor INA780-INA781EVM INA780 and INA781 evaluation module for EZShunt™ Digital Power Monitor with built-in shunt resistor TI-SCB Sensor control board (SCB) for evaluation modules TMAG5273EVM TMAG5273 evaluation module for low-power, linear 3D Hall-effect sensor with I²C interface INA219EVM INA219 evaluation module INA231EVM INA231 evaluation module INA260EVM High Precision Current Shunt Monitor Evaluation Module INA423XEVM INA4230 and INA4235 evaluation module ADS1115EVM-PDK ADS1115 evaluation module for 16-bit, 860-SPS four-channel delta-sigma ADC ADS1015EVM-PDK ADS1015 12-bit, 3.3-kSPS, 4-channel, delta-sigma ADC evaluation module performance demonstration kit ADS1118EVM ADS1118 16-bit, 860-SPS, 4-channel, delta-sigma ADC evaluation module ADS1018EVM ADS1018 12-bit, 3.3-kSPS 4-channel, delta-sigma ADC evaluation module ADS1248EVM-PDK ADS1248 performance demonstration kit for 24-bit, 2-kSPS, eight-channel delta-sigma ADC ADS1148EVM-PDK ADS1148 performance demonstration kit for 16-bit 2-kSPS ADC with PGA for sensor measurement ADS7038Q1EVM-PDK ADS7038-Q1 8-channel, 1-MSPS, 12-bit ADC evaluation module performance demonstration kit (PDK) ADS7066EVM-PDK ADS7066 performance demonstration kit for eight-channel, 250-kSPS, 16-bit, internal-reference ADC BOOSTXL-ADS7142-Q1 ADS7142-Q1 2-channel 12-bit 140-kSPS I2C-compatible ADC BoosterPack™ plug-in module TLA2024EVM-PDK TLA2024 12-bit, 4-channel, delta-sigma ADC with VREF, oscillator, PGA and I2C evaluation module

Release Infomation

The design resource accessed as www.ti.com/lit/zip/sbac253 or www.ti.com/lit/xx/sbac253a/sbac253a.zip has been migrated to a new user experience at www.ti.com/tool/download/SBAC253. Please update any bookmarks accordingly.
TI's Standard Terms and Conditions for Evaluation Items apply.

Technical documentation

star
= Top documentation selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* EVM User's guide INA228, INA229, INA237, INA238, and INA239 EVM User’s Guide (Rev. E) PDF | HTML 17 Aug 2022
Certificate INA238EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) 16 Dec 2020
Certificate INA228EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) 16 Dec 2020
Certificate INA237EVM EU RoHS Declaration of Conformity (DoC) (Rev. A) 16 Dec 2020

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​

Videos