TI does not offer ongoing direct design support for this hardware. For support while working through your design, contact In-Vision Digital Imaging Optics GmbH.
INV-3P-HELIOS
Overview
Designed for DLP® technology based 3D printing, Helios combines In-Vision's new proprietary high-power illumination module with high-performance optics. Based on TI’s DLP9000, Helios offers up to 12W of output power and will contribute to cost-efficient prints, enable applications based on new materials, and qualify additive manufacturing further for serial production. Application areas: 3D Printing, Lithography, Bioengineering and other industrial and scientific applications.
Features
- DLP9000 Chipset
- 2560 x 1600 Micromirror array size
- 365, 385 and 405nm Wavelengths (LED)
- 6 | 31 | 75 | 100 | 150 | 162µ Standard lenses (others on request)
- Up to 12W (wavelength-dependent) Optical Output Power
- LED interchangeablility
- Integrated intensity module for stable high intensity
- Up to 1:300 ANSI Contrast Ratio
- Up to 95% acc. to IEC61947 (Lens dependent) Uniformity
Photos courtesy of In-Vision Digital Imaging Optics GmbH
Order & start development
Optical module
INVISION-HELIOS — In-Vision Helios - 3D printing light engine using DLP9000
Related design resources
Hardware development
EVALUATION BOARD
Support & training
Video series
View all videosVideos
Disclaimer
Certain information and resources (including links to non-TI sites) above may be provided by a third-party partner, and is included here merely for your convenience. TI is not the provider of, and is not responsible for, the content of such information and resources, and you should evaluate them carefully for your intended uses and on your own behalf. The inclusion of such information and resources here does not imply endorsement of any third-party company by TI, and shall not be construed as a warranty or representation regarding the suitability of any third-party products or services, either alone or in combination with any TI product or service.