LP-MSP430FR2476
MSP430FR2476 LaunchPad™ 开发套件
LP-MSP430FR2476
概述
The LP-MSP430FR2476 LaunchPad™ development kit is an easy-to-use evaluation module (EVM) based on the MSP430FR2476 value line sensing microcontroller (MCU). It contains everything needed to start developing on the ultra-low-power MSP430FR2x value line sensing MCU platform, including on-board debug probe for programming, debugging and energy measurements. The board includes 2 buttons, 2 LEDs (one is an RGB LED) and an analog temperature sensor for creating a simple user interface. It also has a CR2032 battery holder (battery purchased separately) enabling standalone applications without an external power supply.
The 16-MHz MSP430FR2476 device features 64-KB of embedded ferroelectric random access memory (FRAM), a non-volatile memory known for its ultra-low power, high endurance, and high speed write access. Combined with the 8-KB of on-chip SRAM, users have access to 64-KB of memory to split between their program and data as required. For example, a data logging application may require a large data memory with a relatively small program memory, so the memory may be allocated as required between program and data memory.
特性
- ULP FRAM technology based MSP430FR2476 16-bit MCU
- On-board eZ-FET debug probe with EnergyTrace™ software technology available for ultra-low-power debugging
- 40-pin LaunchPad development kit standard leveraging the BoosterPack™ plug-in module ecosystem
- 2 buttons and 2 LEDs for user interaction
- On-board TMP235 precision CMOS linear analog temperature sensor
- LP-MSP430FR2476 Launchpad development kit
- Micro-USB cable
MSP430 微控制器
立即订购并开发
LP-MSP430FR2476 — MSP430FR2476 LaunchPad™ 开发套件
MSP-GANG-SOFTWARE — MSP-GANG 软件
MSP-GANG-SOFTWARE — MSP-GANG 软件
MSP-GANG Installer 1.03.09.00
米6体育平台手机版_好二三四
Arm Cortex-M0+ MCU
MSP430 微控制器
硬件开发
评估板
开发套件
文档
MSP-GANG Manifest
发布信息
The MSP Gang Programmer is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical flash or FRAM devices at the same time. The MSP Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the user to fully customize the process.
The MSP Gang Programmer is provided with an expansion board, called the Gang Splitter, that implements the interconnections between the MSP Gang Programmer and multiple target devices. Eight cables are provided that connect the expansion board to eight target devices (via JTAG or Spy-Bi-Wire connectors). The programming can be done with a PC or as a standalone device. A PC-side Graphical User Interface is also available and is DLL-based.
Features:
- Quickly and reliably program Flash or FRAM-based MSP devices via an RS-232 or USB interface
- Several programming modes:
- Interactive Mode Programming while connected to PC using the MSP GANG Programmer GUI
- Program from Image: An image can be stored, which contains configuration options and code files. This allows users to program MSP devices standalone, without a PC
- Programming from Script: Enables developers to automate more complicated programming procedures.
- Intuitive GUI for configuring, programming and testing production setup
- SD Card slot for storing images
- LCD screen for easy programming without a PC
- Supports up to 8 targets simultaneously
- Supports MSPM0/MSP430/MSP432 devices
最新信息
- Added low-power mode debug support for MSPM0
设计文件
技术文档
类型 | 标题 | 下载最新的英文版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 更多文献资料 | LP-MSP430FR2476 software examples | 2019年 5月 7日 | |||
* | 用户指南 | MSP430FR2476 LaunchPad development kit (LP-MSP430FR2476) user's guide | PDF | HTML | 2019年 3月 13日 | ||
数据表 | MSP430FR247x 混合信号微控制器 数据表 (Rev. C) | PDF | HTML | 英语版 (Rev.C) | PDF | HTML | 2021年 10月 27日 | |
证书 | LP-MSP430FR2476 EU Declaration of Conformity (DoC) | 2019年 3月 26日 |