BQ27411EVM-G1C
BQ27411EVM-G1C 电池组端 Impedance Track™ 电量监测计评估模块
BQ27411EVM-G1C
概述
BQ27411EVM-G1C Pack-Side Impedance Track™ 电池电量计评估模块是适用于 bq27411-G1C 的完整评估系统。EVM 包含一个带有外部电流感应电阻器的 bq27411-G1C 电路模块。bq27411-G1C 应与充电电压为 4.35 V 的电池配合使用。使用此 EVM 时，需要配备用于电量计接口的 EV2300 或 EV2400 PC 接口板（可单独订购）、PC USB 电缆以及基于 Windows™ 的 PC 软件。该电路模块包含一个 bq27411-G1C 集成电路，还包含监控和预测容量所需的所有其他板载组件，适用于电池组端电量监测解决方案。该电路模块直接与电池组相连。利用适用于电池电量计评估模块 (EV2300) 的 USB PC 接口板，或适用于电池电量计评估模块 (EV2400) 的 USB PC 接口板和软件，用户可以：
- 读取 bq27411-G1C 数据寄存器。
- 对芯片组进行编程，以获得不同配置。
- 记录循环数据，以便进一步评估。
- 对 bq27411-G1C 解决方案在不同充电和放电条件下的整体功能进行评估。可从米6体育平台手机版_好二三四 (TI) 网站的米6体育平台手机版_好二三四文件夹下载基于 Windows™ 的最新 PC 软件。
相关术语：
- 电池电量计
- 电池电量监测计
- 电池电量监测 IC
特性
- 已组装的电路模块，便于快速设置和评估。
- 可用于数据记录和分析的可下载软件。
电池电量监测
立即订购并开发
BQ27411EVM-G1C — BQ27411EVM-G1C 电池组端 Impedance Track™ 电量监测计评估模块
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
Software installer to enable BQEVSW to use MKST-3P-ALT-EV2300
米6体育平台手机版_好二三四
电池电量监测
硬件开发
评估板
文档
Software manifest
发布信息
Description:
BQEVSW-MKST-UPDATE software is a software update for BQEVSW (bq Evaluation Software) and BQEASY (bq EV-Easy) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in software like BQEVSW and BQEASY from/to EV2300 to/from MKST-3P-ALT-EV2300.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300
- Operating system: Windows (32 or 64 bit)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Features:
- Enable use of MKST-3P-ALT-EV2300 in older software like BQEVSW and BQEASY
- Switch back to use of EV2300 in older software like BQEVSW and BQEASY
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQEVSW-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQEVSW, BQEASY or other similar software.
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
BQMTESTER-MKST-UPDATE — Software Update to enable BQMTESTER to use MKST-3P-ALT-EV2300
Software installer to enable BQMTESTER to use MKST-3P-ALT-EV2300
米6体育平台手机版_好二三四
电池电量监测
硬件开发
评估板
文档
Software manifest
发布信息
Description:
BQMTESTER-MKST-UPDATE software is a software update for BQMTESTER(BQMTESTER Multi Channel Test and Program software) and ADVANCED-BQMTESTER(Advanced bqMTester Multi-Station Test and Program Software) to allow it to work with the MKST-3P-ALT-EV2300 MKS Technology alternative for EV2300 communications transceiver. This update installs a program that allows switching the USB transceiver target in BQMTESTER and ADVANCED-BQMTESTER software from/to EV2300 to/from MKST-3P-ALT-EV2300. There are also some changes required on the hardware side as described in the PDF guide in the install folder.
The program requires administrator privileges.
Requirements:
- Hardware: MKST-3P-ALT-EV2300, 3.3V LDO with connectors, BQMTESTER or ADVANCED-BQMTESTER board
- Supported operating systems: Windows (32 or64 bits)
- Software: Microsoft Visual Studio 2010 C++ Runtime redistributable
Getting started:
1. Download the software
2. Run the installer and check the option to create shortcuts
3. Run the program using shortcut named BQMTESTER-MKST-UPDATE from Start menu/Desktop
4. Allow administrator privilege when/if prompted
5. On the GUI window that opens, select the target transceiver to support and follow steps to switch
6. Connect matching transceiver and start BQMTESTER or ADVANCED-BQMTESTER software
Note: BQMTESTER-MKST-UPDATE and BQEVSW-MKST-UPDATE both update the same software components. Switching the USB transceiver using any of these shortcuts will also switch it in the other.
技术文档
| 类型 | 标题 | 下载最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 证书 | BQ27411EVM-G1C EU Declaration of Conformity (DoC) | 2019年 1月 2日 | ||||
| 用户指南 | bq27411EVM System-Side Impedance Track Fuel Gauge (Rev. A) | 2016年 7月 31日 |