DRV8328AEVM
DRV8328A 三相 PWM 电机驱动器评估模块
DRV8328AEVM
概述
DRV8328AEVM 是一款基于 DRV8328A 栅极驱动器(适用于 BLDC 电机)的 30A 三相无刷直流驱动级。DRV8328 包含三个二极管用于自举操作,因此无需使用外部二极管。该 EVM 包括用于低侧电流测量的电流分流放大器并提供用于评估 DRV8328 器件的所有型号(A、B、C 和 D)的可配置性。这包括用于评估 VDS 过流阈值、驱动器死区时间、集成 LDO 输出或栅极驱动器关断引脚等设置的开关、电位器和电阻器。
可向此 EVM 提供高达 60V 的电压,DRV8328 的集成 LDO 可为自举 GVDD 电源提供所需的栅极电压。包含所有电源的状态 LED 以及故障 LED,用于提供用户反馈。此套件需要使用 C2000 launchpad (LAUNCHXL-F280049C) 通过带传感器的梯形算法来控制 DRV8328AEVM,并监控和报告故障。
特性
- 4.5V - 60V 工作电压、30A 峰值 H 桥输出电流
- 用于组合低侧拉电流测量的板载 CSA
- DRV8328 的 A、B、C 和 D 型号的可配置性
- 用于速度、死区时间、VDSLVL 和栅极驱动器关断控制的开关、电阻器和电位器
- 用于用户反馈的电源 LED 和故障 LED
- 可提供带传感器的 C2000 (LAUNCHXL-F280049C) 梯形固件和 GUI
BLDC 驱动器
立即订购并开发
DRV8328AEVM — DRV8328A 三相 PWM 电机驱动器评估模块
DRV8328A_DRV8328C_EVM_GUI — DRV8328A and DRV8328C evaluation modules Graphical User Interface
DRV8328B_DRV8328D_EVM_GUI — DRV8328B and DRV8328D evaluation modules Graphical User Interface
MSP-MOTOR-CONTROL — MSP firmware solutions for motor control
Sensorless FOC firmware for MSPM0Gx5xx + Motor Driver solutions
Hall Sensor Based FOC firmware for MSPM0Gx5xx + Motor Driver solutions
BLDC sensored trap firmware for MSPM0G + DRV83xx motor drivers
BLDC sensored trap firmware for MSPM0L + DRV83xx motor drivers
Stepper motor firmware for MSPM0L + DRV8xxx motor drivers
Brushed-DC firmware for MSPM0L + DRV8xxx motor drivers
米6体育平台手机版_好二三四
Arm Cortex-M0+ MCU
BLDC 驱动器
步进电机驱动器
有刷直流 (BDC) 电机驱动器
硬件开发
评估板
文档
MSPM0 Motor Control Application Note
Tuning Guide for MSPM0 based Sensorless FOC
MSPM0 BLDC Sensorless FOC Documentation
Application Tuning Guide for MSPM0 Based Hall Sensor FOC
MSPM0 BLDC Sensored Trap Control Documentation
MSPM0 Stepper Motor Control Documentation
MSPM0 Brushed Motor Control Documentation
发布信息
MSP Motor Control is a collection of software, tools, and examples to spin motors in 30 minutes or less with MSPM0 Arm Cortex M0+ MCUs and popular motor driver solutions.
MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and 3-phase motors with sensored and sensorless control algorithms optimized for performance, integration, and ease-of-use. Spin your motor today by ordering hardware, connecting a motor, and using our Graphical User Interfaces or online code examples.
MSP Motor Control includes:
- Complete software and evaluation ecosystem for MSPM0 MCU motor control applications inside MSPM0-SDK
- Support for brushed, stepper, and 3-phase motors with sensored and sensorless algorithms using MSPM0L/MSPM0G devices
- Getting started collateral to spin a motor in 30 minutes or less optimized for efficiency, power delivery, or speed/torque control
- Solutions for field-oriented control (FOC) with a comprehensive suite of features optimized for motor performance
- Hardware support for reference designs, MSPM0 LaunchPads and TI's portfolio of DRV8xxx motor drivers
- Future support for code-free GUI-based motor control, communication interfaces, and automatic tuning
最新信息
- Hall Sensor Based FOC and Sensorless Field Oriented Control.
- Support for BLDC & PMSM motors in Three Shunt, Two Shunt and Single Shunt Configurations
- Initial Speed detection and Initial Position detection feature support
- Configurable Start up and Stop options to meet wide range of application needs.
- Dead Time Compensation for best acoustic performance at lower Motor speeds.
- Maximum Torque Per Ampere algorithm for efficiently driving Salient PMSM Motors
- Field Weakening to spin the motors beyond the Rated Speeds.
- Speed Control, Power Control, Torque Control and Voltage Control modes.
- Evaluation Motor Control GUI to quickly Tune and Test your motors.
SLVC832 — DRV8328AEVM Sensored Trapezoidal Firmware
SLVC832 — DRV8328AEVM Sensored Trapezoidal Firmware
硬件开发
评估板
发布信息
设计文件
技术文档
类型 | 标题 | 下载最新的英文版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 用户指南 | DRV8328AEVM User's Guide (Rev. A) | PDF | HTML | 2022年 7月 13日 | ||
证书 | DRV8328AEVM EU RoHS Declaration of Conformity (DoC) | 2021年 12月 9日 |