TPS25763Q1EVM
TPS25763-Q1 evaluation module
TPS25763Q1EVM
概述
The TPS25763Q1EVM is an evaluation module (EVM) for the TPS25763-Q1, a highly integrated USB Type-C® Power Delivery (PD) controller for use in single USB port applications including: charging only, charging with USB 2.0/3.0 data, charging with DisplayPort™ over USB Type-C. This EVM supports single-port charging only.
特性
- TPS25763-Q1 integrated buck-boost four power switches supports up to 65W USB PD output power with DisplayPort over USB Type-C
- CC1, CC2, DP, DM supports short to VBAT and VBUS protection; VBUS supports short to VBAT and GND protection
- Supply voltage and temperature-dependent power management
- USB Type-C Power Delivery Rev 3.1 and battery charging specification Rev 1.2 compliant
USB Type-C 和 USB 电力传输 IC
立即订购并开发
评估板
TPS25763Q1EVM — TPS25763-Q1 evaluation module
TI.com 上无现货
评估模块 (EVM) 用 GUI
TPS257XX-Q1-GUI — Graphical user interface for the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family and EVMs
TPS257XX-Q1-GUI — Graphical user interface for the TPS2576x-Q1 and TPS2577x-Q1 USB Power Delivery controller device family and EVMs
版本: 2.1.0
发布日期: 11 十一月 2024
Download from dev.ti.com gallery dashboard
米6体育平台手机版_好二三四
USB Type-C 和 USB 电力传输 IC
硬件开发
评估板
发布信息
V2.1.0
Requires base firmware release F411.04.01 for D revision devices
Requires base firmware release F311.03.10 or F311.03.11 for C revision devices
Improvements
- New: Added support for TPS257xxD-Q1 devices
- Target device must be selected in the updated Quick Start page to create a binary or import an existing app config JSON
- UI allows for "C" devices or "D" devices to be selected ("CA" device variants are supported when "C" devices are selected in the UI)
- Added DP Alternate Mode configurability (see "ALT MODE" tab) for TPS25763D device variant
- New: Added support to import prior revision JSON configuration files ("C" devices) to "D" devices when selected
- Recommend reviewing resulting configuration for any unexpected changes before programming
- New: Updated "VIN Engine On/Off" tab
- Applies to revision C and D devices
- Updated User Interface (UI) and field naming to improve intuitiveness (available features/controls for revision C have not changed, only naming & UI layout)
- Added new controls specific to "D" devices: support for additional power level and threshold settings ("RANGE 4") for improved port power management options
- Update: For TPS25762C/D and '763D device configurations, GPIO2 and GPIO3 are set to default to "Disabled" for new configurations (was previously enabling I2C function by default)
Bug Fixes
- n/a
Known Limitations
- "USB Endpoint Flash" programming with TPS25763D-Q1 EVM (IPP015) may not function reliably. Recommend using "EEPROM Flash" programming in the GUI to load user application configuration binary when using the EVM. Alternatively, can use direct programming of EEPROM using a 3rd party programming tool.
技术文档
未找到结果。请清除搜索，并重试。
查看所有 3
| 类型 | 标题 | 下载最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| 用户指南 | TPS257XX-Q1-GUI Configuration Guide (Rev. C) | PDF | HTML | 2024年 11月 18日 | |||
| EVM 用户指南 | TPS25763-Q1 评估模块 (Rev. A) | PDF | HTML | 英语版 (Rev.A) | PDF | HTML | 2024年 10月 29日 | |
| 证书 | TPS25763Q1EVM EU Declaration of Conformity (DoC) | 2024年 8月 20日 |